779962
9
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISHENGLISH
IMPORTANT!
After a dismantlement of the rear shock, both fixing bolts should be tightened with a
tightening torque of 10Nm/88in-lbs.
If this is not done correctly the rear shock can be damaged.
SET-UP OF OTHER SHOCK MODELS
SCOTT strongly recommends using only the FOX Nude (FOX CTD shock) with the
Genius LT bike, as we designed both parts for a perfect matching combination with a linear
suspension rate.
Also on those shock models the SAG should be 18mm.
Other Shock Models on Genius LT
If you want to use a different rear shock model than the one originally on the bike, please
make sure that the shock will not in any position hit the frame and cause a damage to
the frame.
Please follow the instruction below:
-Please make sure that the rear shock or its accessory parts do not touch the frame when
mounting or suspending.
-For doing so release the air/remove the coil, install the shock and compress the shock
completely.
-If the shock touches the frame while doing so, do not use this shock in order to avoid
damage to frame, swingarm or shock.
SET-UP OF REBOUND FOX NUDE OR FOX CTD SHOCK
Rebound” describes the speed the shock comes back to its original length after absorbing
an obstacle.
By using the rebound adjuster knob (S4) you can adjust the rebound step by step.
Please refer to the following instruction:
Ride your bike off a pavement (remain in the saddle) and check how many times it bounces.
-If it bounces 1-2 times, the set up is good.
-If it bounces more than 3 times the rebound is too fast. Turn the knob 1-2 “clicks”
clockwise
-If it does not bounce the rebound is too slow. Turn the knob 1-2 “clicks” counter
clockwise.
IMPORTANT!
Note that you have to mount the FOX
Nude Shock always as shown below.
Mounting the rear shock in a different
position can cause severe damage to
the frame, the linkage levers and the
rear shock.
Same for the FOX CTD on some of the
Genius LT models.
17 |
BIKE USER MANUAL | GENIUS LTGENIUS LT | BIKE USER MANUAL
| 16
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Genius LT 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Genius LT 2018 in the language / languages: English as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Genius LT 2018

Scott Genius LT 2018 User Manual - German - 16 pages

Scott Genius LT 2018 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info