737636
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
For safe storage of the machine, remove the power supply and place in a secure location. Tighten the
Brake/Resistance Adjustment Knob as described until the Flywheel is locked. Place the machine in a secure
location away from children and pets.
With the Flywheel locked, the level of resistance will be out of the range of operation displayed by the Console. Do not
use the machine with the level of resistance outside of the 0% - 100% range. This will damage the ability to quickly stop
the Flywheel during an emergency, and the effectiveness of securing the bike for storage. Turn the Emergency Brake/
Resistance Adjustment Knob until the LEVEL displayed on the Console is less than 100%. The resistance is now in the
designed range of operation for the bike.
Power-Up Mode
The Console will enter Power-Up Mode if any button is pushed, or if it receives a signal from the RPM sensor as a result
of pedaling.
Auto Shut-O󰀨 (Sleep Mode)
If the Console does not receive any input in approximately 5 minutes, it will automatically shut o󰀨. The LCD display is o󰀨
while in Sleep Mode.
Note: The Console does not have an On/Off switch.
Resistance Adjustment
To adjust the resistance and workload, turn the resistance adjustment knob clockwise. To reduce the resistance, turn
the resistance adjustment knob counter-clockwise. The range of movement of the Resistance Adjustment Knob is 0% to
slightly past the 100% level of resistance (locked Flywheel). Do not turn the Resistance Adjustment Knob past the range of
movement. If turned past the range of movement, damage to the machine may occur.
Starting a Workout
1. Push the START/ENTER button. The Console will display the Time value.
2. Push the Increase / Decrease buttons to modify the Time value of the workout. When done, push the START/ENTER
button.
3. The Console will display the Calories value. Push the Increase / Decrease buttons to modify the Calories value. When
done, push the START/ENTER button.
4. The Console will display the Distance value. Push the Increase / Decrease buttons to modify the Distance value. When
done, push the START/ENTER button.
5. The Workout will begin.
Changing Unit Measures (English Imperial/Metric)
The units of measurement can be switched between kilometers and miles before you start a workout. To change the units,
push UP and DOWN together and hold 3 seconds. When the display begins to blink, use the arrow button to change the
units (KM or MI). Push any button to save.
Pausing or Stopping
1. Stop pedaling to pause your workout. The Console will pause the workout if there is no RPM signal for 2 seconds.
2. To continue your workout, start pedaling.
The workout will end after being paused for 5 minutes.
When paused, the Console display will display the current workout values for the workout. To end the paused workout,
push and hold down the Reset button.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn IC4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn IC4 in the language / languages: English as an attachment in your email.

The manual is 6,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Schwinn IC4

Schwinn IC4 User Manual - German - 32 pages

Schwinn IC4 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info