737325
40
Zoom out
Zoom in
Previous page
1/54
Next page
40
5. Push the Increase() or Decrease() buttons to set the Maximum Speed, and push OK.
6. Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
7. Push the Increase() or Decrease() buttons to set the goal value for the workout, and push OK.
Note: Be sure to allow time for your heart rate to reach the desired heart rate zone when setting the goal. The Console will
display the heart rate value based on the current User settings.
8. Push START to begin the workout.
Compare Pacer Displays
The Compare Pacer Displays allow a User to focus, or train, on a set program and
distance, and see how they compare against past workouts while doing a workout. The
average, or best, past workout with the same distance goal are the pacers for the currently selected workout.
The User Placement Display shows the User where they are in relation to the pacer, with a time value and an UP arrow (in
front) or DOWN arrow (behind the pacer).
The User Indicator Lights across the top of the Console quickly show the location of the User in relation to the pacer. The
Pacer Icon (center of the User Indicator Lights) is the placement of the pacer, the Indicator Light is the User. The time differ-
ence between the User and the pacer is shown by which User Indicator Light is active (see the time scale below).
- -120 -60 -30 -15 -5 +5 +15 +30 +60 +120 +
(seconds)
Note: The values presented during the fi rst workout are based on the default pace value of 12 minutes per mile.
When a workout is started, the Average Pacer will be active. To change the pacer during a workout, push the COMPARE but-
ton. The pacer will shift to the Best Pacer, and the User Placement Window and appropriate User Indicator Light will adjust. If
the COMPARE button is pushed again, the feature is Off, and the User Placement Display and Indicator Light will be deacti-
vated.
Note: When the distance goal for the program is changed, it is a shift in the training focus of the program. The compare
display will use the default values until a workout with the new distance goal is completed.
During a Pacer workout (1 Mile Pacer, 5k Pacer, 10k Pacer), the User inputs the time it will take for the pacer to complete the
workout. The User Placement Window does not have an off option during a Pacer workout. The Compare button shifts the
pacer value from Input Pace, Average, or Best.
Fitness Score Display
The Fitness Score is based on an estimate of the User’s VO2 Max and calorie burn over their
last five workouts.
VO2 Max estimates are calculated using performance data (time, distance and average heart rate or an estimate of aver-
age heart rate if that data is unavailable). VO2 Max is the maximal oxygen consumption of the aerobic physical fi tness of the
individual, and is a determinant of the endurance capacity of the User during prolonged exercise. ( V = Volume, O2 = Oxygen,
and Max = maximum rate ).
For every workout completed that is longer than 10 minutes or a mile (1.6 km) in distance, the Console will apply those work-
out values toward your Fitness Score. This value is displayed on the Fitness Score Display area of the Console.
Note: Using a Heart Rate Chest Strap provides the most accurate information to calculate the Fitness Score. A Fitness
Score is provided when a minimum of 10 minutes or 1 mile (1.6 km) of distance is done during a workout. If no heart
rate is supplied, an approximation based on the User Profile will be used to calculate the score.
INCLINE SPEED
www.schwinnconnect.com
Fitness Score
INCLINE SPEED
www.schwinnconnect.com
Fitness Score
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 870 in the language / languages: English as an attachment in your email.

The manual is 18,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info