737323
7
Zoom out
Zoom in
Previous page
1/50
Next page
7
Emergency Stop Procedure
The Treadmill machine is equipped with a Safety Key that can prevent serious injury, as well as prevent children from
playing with and/or being injured on the machine. If the Safety Key is not correctly inserted into the Safety Key Port, the
belt will not operate.
!Always attach the Safety Key Clip to your clothing during your workout.
When you use the machine, only remove the Safety Key in an emergency. When the key is removed while
the machine is in operation, it will stop quickly, which could cause the loss of balance and possible injury.
For safe storage of the machine, and to prevent unsupervised operation of the machine, always remove
the Safety Key and disconnect the power cord from the wall outlet and the AC input. Place the power cord
in a secure location.
The Console will display “ + SAFETY KEY ”, or add Safety Key, for a Safety Key fault. The Treadmill machine will not start
a Workout, or will end and clear an active Workout, when the Safety Key is removed. Inspect the Safety Key and be sure
it is connected to the Console correctly.
Earthing Instructions
This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-earthing
conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is properly installed and earthed
in accordance with all local codes and ordinances.
Improper connection of the equipment-earthing conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if you are in doubt as to whether the product is
properly earthed. Do not modify the plug provided with the product – if it will not t the outlet,
have a proper outlet installed by a qualied electrician.
If you connect the machine to an outlet with RCD (residual-current device), GFI (ground fault interrupt) or AFI (arc fault
interrupt), machine operation can cause the circuit to trip. This machine is for use on a nominal 120-V circuit, and has a
earthing plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated may be
used to connect this plug to a 2-pole receptacle as shown if a properly earthed outlet is not available.
Thetemporaryadaptershouldbeusedonlyuntilaproperlyearthedoutletcanbeinstalledbyaqualiedelectrician.
Thetabfortheearthingscrewmustbeconnectedtoapermanentearthsuchasaproperlyearthedoutletboxcover.
Whenever the adapter is used, it must be held in place by a metal screw.
Metal Screw
Tab for
Earthing
Screw
Adapter
Earthed
OutletBox
Earthed
Outlet
Earthing Pin
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 830 in the language / languages: English as an attachment in your email.

The manual is 14,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info