737318
39
Zoom out
Zoom in
Previous page
1/50
Next page
39
2. The Console shows the RECOVERY TEST workout. Push OK.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated
or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console is an
approximation and should be used for reference only.
3. Push the Increase() or Decrease() buttons to select the Heart Rate Zone (HR Zone), and push OK.
4. The program begins with a 2 minute period at a causal pace. The Console will display the selected zone and the heart rate
value to start the test.
5. After two minutes, the Console will request the heart rate, “GRASP SENSORS”, if one is not detected.
If the heart rate is not in the zone, the Incline of the walking deck will be increased and the heart rate will be checked again
in one minute. This will continue until the heart rate is in the zone.
6. With the heart rate in the selected zone, the User must continue at this workout setting for three minutes.
7. After three minutes, the Incline will adjust to zero. The Console will begin a one minute cool down. The Recovery Test
value will be presented after the final heart rate reading at the end of the cool down period.
Note: Recovery Test values should only be compared to your previous values and not to other User Profiles.
Pausing or Stopping
The Console will go into Pause Mode if the user pushes PAUSE/STOP during a workout.
1. Push the PAUSE/STOP button to pause your workout. The Console will display “ PAUSED “.
2. To continue your workout, push the START button.
To stop the workout, push the PAUSE/STOP button. The Console will go into Results / Cool Down mode.
Results / Cool Down Mode
All workouts except Quick Start and the Heart Rate Control programs have a 3-minute Cool Down period. During this Cool
Down period, the Console shows the Workout Results. The Console will cycle through the workout results every 4 seconds.
During the Cool Down period, the speed of the walking belt will adjust to 3.2 km/h (2 mph) and the incline setting will adjust to
zero. The User can adjust the belt speed and deck incline during the Cool Down period.
Push PAUSE/STOP to end the Results / Cool Down period and go back to Power-Up Mode. If there is no input to the Con-
sole for 5 minutes, the Console automatically goes into Sleep Mode.
GOAL TRACK Statistics (and Achievements)
The statistics from every workout are recorded to a User Profile.
To view the GOAL TRACK statistics of a User Profile:
1. From the Power-Up screen, push the User button to select a User Profile.
2. Push the Goal Track button to enter the Goal Track mode.
Note: To exit the Goal Track mode, push the Goal Track button and the console will go back to the Power-Up Mode
screen.
3. The Console will display the “LONGEST WORKOUT, the workout values and activate the corresponding Achievement light.
After 4 seconds, the Console will display the name of the workout, and then the date it was performed (except for “LAST
7 DAYS” and “LAST 30 DAYS”).
Note: To exit the GOAL TRACK statistics, push the PAUSE/STOP button and the console will go back to the Power-Up
Mode screen.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 530 in the language / languages: English as an attachment in your email.

The manual is 14,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Schwinn 530

Schwinn 530 User Manual - German - 54 pages

Schwinn 530 User Manual - Dutch - 50 pages

Schwinn 530 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info