671385
12
Zoom out
Zoom in
Previous page
1/29
Next page
OPERATION
10
HOW TO USE THE 102/202 BIKE
Seat adjustment
Proper seat adjustment helps ensure maximum exercise efficiency and comfort, while reducing the
risk of injury.
1. Place one pedal in the forward position and center the ball of your foot over the center of the
pedal. Your leg should be slightly bent at the knee.
2. If your leg is too straight or your foot cannot touch the pedal, you will need to move the seat down
on the 102 or forward on the 202 bike. If your leg is bent too much, you will need to move the
seat up on the 102 or backward on the 202 bike.
3. Adjust the 102 seat by first dismounting the bike, then pulling out the adjustment knob on the seat
tube and releasing the locking pin. Lower or raise the seat to the desired height. Release the seat
knob, engaging the locking pin. Be sure that the pin is fully secured in a seat post hole.
To adjust the 202 seat, pull the seat knob up with your right hand to release the seat. Slide the
seat forward or backward to the desired position. The knob will “pop” up into the next hole; turn
the knob to ensure a tight fit.
4. The 102 also features a fore / aft adjustment. To move the seat closer to, or away from the
console, loosen the knob, slide the seat forward or rearward to the desired position and re-tighten.
Foot positioning/pedal strap adjustment
Place the ball of each foot on the pedals. Rotate the pedals until one foot is within arms reach. Then,
reach down carefully and fasten the rubber strap over your shoe and secure it to the pedal by slipping
the nub at the end of the pedal through one of the slots in the strap. Pull down on the strap until
it snaps into place. Repeat for the other foot. Point your toes and knees directly forward to ensure
maximum pedal efficiency. Pedal straps can be left in place for subsequent workouts.
Handlebar Adjustment
The 102 offers an adjustable handlebar to ensure a variety of comfortable hand positions. To adjust the
angle of the handlebars, loosen knob, adjust the handlebars to the desired position and re-tighten.
Resistance adjustment
Using the console, you have control over the levels of resistance integrated into your workout.
Typically, lower resistance levels enable you to move at a faster pace, placing increased demand on
your cardiovascular system. Higher resistance levels will typically deliver more of a muscle/ endurance
workout at lower RPMs. But everyone is different! So experiment and find the beginning of resistance
that is comfortable for you.
Lower body workout
Once you are in position and sitting comfortably, slowly begin pedaling, with your arms relaxed at your
sides and with your hands resting on the top of your thighs or on the hand grips. Pedal at an easy
pace, at a low resistance level until you feel secure and comfortable. As you feel more comfortable,
experiment with the range of resistance levels available via the console.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 202 Upright Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 202 Upright Bike in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info