671432

Schwinn 150 Upright Bike Manual

38
Zoom out
Zoom in
Previous page
1/48
Next page
38
CONSOLE SETUp MOdE
The Console Setup Mode lets you set the units of measurement to either English or Metric,
change the machine type, or see maintenance statistics (Error Log and Run Hours – for service
technician use only).
1. Hold down the Increase button and Decrease button together for 3 seconds while in the
Power-Up Mode to go into the Console Setup Mode.
Note: Push STOP to go back to the previous screen or the Power-Up Mode screen.
2. The Console display shows the Units prompt. Push START/ENTER to start Units option. Push
the Increase/Decrease buttons to change between “Miles-Lb” (Imperial English units) and
“Km-Kg”(metricunits).
Note: If the units change when there is data in User Statistics, the statistics convert to the new
units.
3. PushSTART/ENTERtoset.Forthenextoption,pushtheIncreasebutton.
4. The Console display shows the Machine Type prompt. Push START/ENTER to start Machine
Typeoption.PushtheIncrease/DecreasebuttonstochangebetweenELLIPTICALandBIKE.
5. PushSTART/ENTERtoset.Forthenextoption,pushtheIncreasebutton.
6. The Console display shows the Brightness prompt. Push START/ENTER to start the
brightness option. Push the Increase/Decrease buttons to change the backlight levels from 1
(lowest) to 5 (highest).
7. PushSTART/ENTERtoset.Forthenextoption,pushtheIncreasebutton.
8. The Console display shows the Error Log prompt. Push START/ENTER to start Error Log
option. The Error Log stores the last 10 errors (error type and system time of error), listed
newest to oldest. Push the Increase/Decrease buttons to move through the Error Log. If there
arenoerrors,theConsoledisplayshows“Index=0”.
9. PushSTOPtoexit.Forthenextoption,pushtheIncreasebutton.
10. The Console shows the RUN HOURS prompt. Push START/ENTER to see total hours and
minutes for the machine.
11. PushSTOPtoexit.Forthenextoption,pushtheIncreasebutton.
12. The Console display shows the Units prompt again. Push STOP to go back to the Power-Up
Mode screen.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 150 Upright Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 150 Upright Bike in the language / languages: English as an attachment in your email.

The manual is 6,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info