671396
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Power-Up / Idle Mode
The Console will enter Powe r-Up Mode if it is plugged into a power source, any button is pushed,
or if it receives a signal from the RPM sensor as a result of pedaling the machine.
Auto Shut-Off (Sleep Mode)
IftheConsoledoesnotreceiveanyinputorthereisnopedalmovementinapproximately5
minutes, it will automatically shut off. The LCD display is off while in Sleep Mode.
Note: The Console does not have an On/Off switch.
Initial Setup
Before the machine is used for the first time, you must set the Console measurement units and
machine type.
1. At the first power-up the Console display will show Select Units prompt. Push the Increase/
Decreasebuttonstochangebetween“Miles-Lb”(Englishunits)and“Km-Kg”(metricunits).
2. Push START/ENTER to set.
3. The Console display shows Select Elliptical or Bike prompt. Push the Increase/Decrease
buttonstogototheBIKEoption.
4. Push START/ENTER to set. The Console goes back to the Power-Up Mode screen.
To change these settings, refer to the “Console Setup Mode” section in this manual.
Quick Start / Manual Program
The Quick Start / Manual program lets you start a workout without entering any information.
1. Sit on the seat.
2. PushtheQUICKSTARTbuttonandstarttopedal.
3. To change the resistance level, push the Increase/Decrease buttons. The default Quick Start
resistance level is 3. The time will count up from 00:00.
4. When done with your workout, stop pedaling and push STOP to pause the workout. Push
STOP again to end the workout.
Workout Program Selection
To go to the Program Menu, start to pedal or push START/ENTER. If no User profile is set up, the
Console display shows the Program Menu.
If a User profile is set up, you must make a User selection in the User Menu. Use the Increase/
Decrease buttons to look at the User menu options, and push START/ENTER to make your
selection. You can use the Guest User option to go to the Program Menu without user setup data.
If you want to save your workout data, refer to the User Setup procedure in this manual.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 120 Upright Bike - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 120 Upright Bike - 2012 in the language / languages: English as an attachment in your email.

The manual is 6,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info