671376

Schwinn 10 Series Exercise Bike Manual

12
Zoom out
Zoom in
Previous page
1/18
Next page
Owner’s Manual
12
Operation
We recommend that you only set one goal (TIME, DISTANCE, or CALORIES) for
each exercise.
Note: If no goals are set and the goal displays are 0, the TIME, DISTANCE, and
CALORIES values will count up once the START / STOP button is pressed
and you begin exercising.
Quick Start
If you want to immediately start exercising without choosing any specific program
or inputting any goals, simply press the START / STOP button after the computer
powers up to begin exercising in the Manual mode.
Resistance control
In the MANUAL program you can adjust the level of resistance at any time by
using the UP or DOWN buttons to select from level 1 to level 8. In the preset
profile programs you can also adjust the level of resistance, but you can not lower
the resistance below the minimum preset resistance. For example if the minimum
preset level of resistance in one interval of the preset profile program is level 2,
you are not able to manually lower the resistance to level 1. However, you can
raise and lower the resistance between the lower and upper presets.
Exercising with preset TIME
The workouts are segmented into 16 intervals. If you preset the TIME, each
segment of your workout is 1/16 of the total TIME you entered. For example if
you enter a workout TIME of 16 minutes, each segment (interval) is 1 minute in
duration. The TIME counts down from the preset TIME you entered until the
program reaches 0, the display flashes, and the program ends.
Exercising without preset TIME
If you choose not to preset TIME you can enter a preset DISTANCE. To do this,
make sure that the TIME is set to 0:00, and press MODE when the TIME display
is flashing to advance to DISTANCE. When setting a preset DISTANCE, each
segment (interval) counts down in units of .01 until the program reaches 0, the
display flashes, and the program ends. If you choose not to enter a preset
distance the program advances (counts up) in increments of .01 until you choose
to stop exercising.
To advance to set a CALORIE goal, do not preset a TIME or a DISTANCE goal
(make sure those values are set to 0). Just press MODE when those displays
flash. This will bring you to the CALORIE goal.
After you have set the goal of your choice press START / STOP to begin exercising.
TOC
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn 10 Series Exercise Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn 10 Series Exercise Bike in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info