Manual Scholtes ti 864 (page 61 of 66) (English, Dutch, French)

331315

Zoom out

Zoom in

1/66

Technical information for the fitter

Installation

This hob can be built into a worktop simply by cutting out the corresponding slot. All support

types are suitable: only some plastic materials are unadvised, as heat of up to approximately

100°C could cause their deformation. Make sure you leave 50 mm of room between the rear

cut-out of the hob and the back of the worktop, to avoid burning the wall or the backsplash,

especially if the latter is laminated.

When positioning the hob, take particular care in ensuring the seal surrounding the hob is

correctly in place, in order to avoid any leaks into the supporting cabinet.

Very important

It is vital that you ensure the glass ceramic hob is built into a perfectly flat supporting surface.

Deformations due to improper fastening could alter the characteristics of the hob and compromise

its performance.

Turning on the hob

Using the hob for the first time. The glue used on the hob seals may leave greasy traces on

the glass surface during warehousing. We recommend you wipe these traces off before using

the appliance, using an ordinary cleaning product (non abrasive polish). During the first few

hours of use, you may detect a smell of rubber, which will disappear quickly.

Distance to

keep between the

cut-out slot and

the cabinet

This hob corresponds to a built-in installation type Y

(IEC 335-2-6 Norm)

8 mm

The hob should not be installed above an oven with a

rear outlet. If the hob is fitted above an oven, in order to avoid

any overheating on the part of the hob's electric components,

it is vital that you leave a space 560 mm wide and 8 mm

high between the top edge of the oven and the bottom of the

worktop.

Avoid fitting a dishwasher underneath the hob. If this is

unavoidable, place a watertight separating element between

the two appliances.

785

750 +/- 1

510

490+/- 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes ti 864 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes ti 864 Manual

Product: