456522

Scholtes LVX 12-56 Manual

18
Zoom out
Zoom in
Previous page
1/60
Next page
18
EN
Start-up and use
* Only available in selected models.
A
B
D
C
Measuring out the detergent
A good wash result also depends on the correct
amount of detergent being used; exceeding the
stated amount does not result in a more effective
wash and increases environmental pollution.
Only use detergent which has been
specifically designed for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam
residue remaining in the machine after the cycle
has ended.
The use of tablets is only recommended for
models which offer the MULTI-FUNCTIONAL
TABLETS option.
To achieve the best results from each washing
and drying cycle, powder detergent, rinse aid
liquid and salt should be used.
Compartment A: Washing detergent
Compartment B: Pre-wash detergent
1. Open cover C by pressing
button D.
2. Pour in the detergent after
consulting the Table of wash
cycles:
 For powder detergent use
compartments A and B.
 For detergent in tablet form:
when the cycle requires 1 tablet, place it in compartment
A and close the cover; when it requires 2, place the
second tablet at the bottom of the appliance.
3. Remove detergent residues from the edges of the
compartment and close the cover until it clicks.
Starting the dishwasher
1. Turn the water tap on.
2. Open the door and load the racks (see Loading the Racks).
3. Measure out the detergent (see adjacent figure) and close
the door.
4. Press the ON/OFF button; you will hear a short beep and all
the indicator lights on the control panel and the display will light
up for a few seconds.
5. Turn the wash cycle selector until the reference notch on the
knob corresponds with the symbol or number of the cycle you
wish to set (consult the wash cycle table contained in this manual,
especially when first using the appliance).
6. Select the wash options (see Wash options
*)
After a few seconds, a beep indicates the wash cycle has started
and the cycle phase in progress indicator light displays the
symbol corresponding to the phase with which it has begun.
Pre-wash, Wash, Rinse and Drying.
The multifunction numeric indicator will indicate the estimated
amount of time left until the end of the wash cycle.
Do not expect a precise countdown as the wash cycle starts
with an estimated cycle time that is updated as the cycle
progresses and according to a number of parameters that affect
the cycle itself (such as water hardness, the temperature of the
water, the degree of soil, etc.).
7. At the end of the wash cycle, 2 beeps are sounded and the
word END flashes. Bring the selector back to the RESET
position, and the 3 dashes for programming cancellation will
appear.
8. Wait for a few minutes before opening the door, in order to
avoid burns. Press the ON/OFF button, unplug the appliance
and shut off the water tap.
9. Wait for a few minutes before removing the crockery, in order
to avoid burns. Unload the racks, beginning with the lower level.
Modifying a wash cycle in progress
If a mistake was made during the wash cycle selection
process it is possible to change the cycle, provided that it has
only just begun:
To modify it, turn the knob and set it to RESET. After a few
seconds, you will hear 4 beeps, wash cycle indicator relating
to the phase under way will turn off and 3 dashes will appear.
At this point, all the settings will have been cancelled.
To select a new wash cycle, repeat the instructions contained
in the paragraph entitled "Starting the dishwasher".
Adding extra crockery
Without switching off the machine, open the door, taking
care to avoid the escaping steam, and place the
crockery inside the dishwasher. Close the door: the
cycle starts from the point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a
power cut, the cycle stops. It starts again from the point at
which it was interrupted once the door has been shut or once
the electricity supply is restored.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scholtes LVX 12-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes LVX 12-56 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info