Manual Scholtes LVTI 12-56 (page 20 of 56) (English, German, Dutch, French, Italian)

495414

Zoom out

Zoom in

1/56

Shutting off the water and electricity

supplies

• Turn off the water tap after every wash cycle to

avoid leaks.

• Remove the plug from the socket when cleaning

the machine and when carrying out maintenance

work.

Cleaning the dishwasher

•

The external surfaces of the machine and the

control panel may be cleaned using a non-

abrasive cloth which has been dampened with

water. Do not use solvents or abrasive products.

• Any marks on the appliance interior may be

removed using a cloth dampened with water

and a little vinegar.

Preventing unpleasant odours

• Always keep the door of the appliance ajar in

order to avoid moisture from forming and being

trapped inside the machine.

• Clean the seals around the door and detergent

dispensers regularly using a damp sponge.

This will avoid food becoming trapped in the

seals, which is the main cause of the formation

of unpleasant odours.

Cleaning the sprayer arms

Food residue may

become encrusted onto

the sprayer arms and

block the holes used to

spray the water. It is

therefore

recommended that the

arms are checked from

time to time and

cleaned with a small

non-metallic brush.

Cleaning the filters

The filters remove food residue from the water

used in the wash cycle: to obtain the best results

from each wash, they should be cleaned.

 Clean the filters regularly.

 After cleaning check that the filter assembly has

been replaced correctly.

 The dishwasher should not be used without

filters.

 The dishwasher should not be used without

filters, or when the filter is loose.

1. Remove the filters by pulling the handle

upwards.

2. Clean the filters:

• after every wash

cycle, remove the

largest pieces of

residue from

semicircular plate A

and glass B (these

may be removed by

pulling the handle) by

rinsing them under

running water.

• The entire filter

assembly should be

cleaned thoroughly

once a month: this

includes the

semicircular plate A,

the glass B and the

cylinder C (this may

be removed by turning

it in an anti-clockwise

direction). Use a small

non-metallic brush to clean these parts.

3. Reconstruct the filter assembly and replace it in

the correct position, following movements 1 and 2

as shown in the figure, until it clicks into place.

Leaving the machine unused for

extended periods

• Run a wash cycle when the dishwasher is

empty.

• Unplug the appliance and disconnect the water

supply.

• Leave the door of the appliance ajar.

Care and maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes LVTI 12-56 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes LVTI 12-56 Manual

Product: