Manual Scholtes HDB 9 (page 14 of 40) (English, German, Dutch, French, Italian)

491213

Zoom out

Zoom in

1/40

! It is always necessary to isolate the hood from the

power supply during cleaning and maintenance.

Therefore remove the plug.

We recommend carrying our maintenance regularly

(about every 10 days) to ensure efficacious and

constant performance of the hood.

Cleaning

The cooker hood should be cleaned regularly (at least

with the same frequency with which you carry out

maintenance of the fat filters) internally and externally.

Clean using the cloth dampened with neutral liquid

detergent. Do not use abrasive products. DO NOT USE

ALCOHOL!

WARNING:

Failure to carry out the basic cleaning

recommendations of the cooker hood and replacement

of the filters may cause fire risks.

Therefore, we recommend oserving these instructions.

The manufacturer declines all responsibility for any

damage to the motor or any fire damage linked to

inappropriate maintenance or failure to observe the

above safety recommendations.

Cleaning the grease filters

Traps cooking grease particles.

This must be cleaned once a month using non

aggressive detergents, either by hand or in the

dishwasher, which must be set to a low temperature

and a short cycle. When washed in a dishwasher, the

grease filter may discolour slightly, but this does not

affect its filtering capacity.

To remove the grease filter, pull the spring release

handle.

Cleaning the carbon filter

It absorbs unpleasant odours caused by cooking.

The charcoal filter can be washed once every two

months using hot water and a suitable detergent, or in

a dishwasher at 65°C (if the dishwasher is used, select

the full cycle function and leave dishes out).

Eliminate excess water without damaging the filter,

then remove the mattress located inside the plastic

frame and put it in the oven for 10 minutes at 100° C to

dry completely. Replace the mattress every 3 years

and when the cloth is damaged.

Mounting and changing the filter

Carbon filter

Remove the filter holder frame by turning the knobs (g)

90° that affix the chimney to the cooker hood.

Insert the pad (i) of activated carbon into the frame (h)

and fit the whole back into its housing (j).

Replacing lamps

Disconnect the hood from the electricity.

Warning! Prior to touching the light bulbs ensure they

are cooled down.

• Use a small screwdriver as a lever on the borders

of the lamp in order to remove the lightbulb.

• Slide out the lightbulb to be replaced and replace

with a new 12V 20W MAX 30° Ø35 12V GU4.

• Carry out the replacement and mount the new

lightbulb by following instructions in the reverse.

Maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes HDB 9 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes HDB 9 Manual

Product: