330988

Scholtes fx 66 1g ax Manual

25
Zoom out
Zoom in
Previous page
1/50
Next page
- 26 -
Electrical connection
The marking corresponds to the application of the following directives:
• electromagnetic compatibility EC/89/336
• marking EC/93/68
• low voltage directive EC/73/23
Before making the connection, check the mains electricity supply available:
• single-phase connection,
• voltage: 230 V or 240 V,
• fuse: 16 A,
• minimum cross-section of wires: 1.5 mm².
Your oven is delivered fitted with a 3-wire power supply cable (each wire has a cross-section of 1.5 mm²) and should be
connected to the 230V or 240V single-phase connection. The yellow/green wire is connected to the earth connection
of the appliance. The oven neutral (blue wire) should be connected to the mains neutral terminal.
If the appliance installation is achieved by means of a junction box, an omnipolar circuit breaker with a minimum contact
opening of 3 mm should be installed on the power supply side.
Make sure the electricity socket is accessible for any future maintenance work.
Important:
- Unplug the appliance before all operations, even when replacing the oven lamp.
- Using the appliance without the correct earth connection is highly dangerous.
Note:
The power supply cable can be changed. This should be done by an authorised fitter or equivalent qualified technical
serviceman.
Make sure the power supply cable is long enough to allow for any future maintenance work to be performed easily.
Only use HAR-H05-RRF quality cables fitted with a plug conforming to the regulations in force.
After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.
The point of installation for the appliance must comply with NFC 15100.
Electrical connections Voltage Frequency
Fuse
Section
FR-AT-BE-DE-GP-ES-IE-IL-IS-IT-DK
LU-RE-FI-GB-GR-PT-SE-MA-NZ-NL
230 V-1+N ~ 50 Hz
CY-MT-AU-NZ-KW
240 V-1+N ~ 50 Hz
16 A
1,5 mm²
FR-BE-NO
230 V-2 ~ 50 Hz
16 A
1,5 mm²
LN
L1L2
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scholtes fx 66 1g ax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes fx 66 1g ax in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info