Manual Scholtes FN36XA (page 25 of 64) (English, French, Italian, Portuguese, Spanish)

536324

Zoom out

Zoom in

1/64

Automatic cleaning using the

PYROLYTIC cycle

During the PYROLYTIC cycle, the internal

temperature of the oven reaches 500°C. When the

pyrolytic cycle is activated, food and grime residues

are burnt away. Dirt is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven as a

result of the combustion process. There is no cause

for concern: this process is both normal and hazard-

free.

Before initiating the PYROLYTIC cycle:

 remove large or coarse food residues from the

inside of the oven using a damp sponge. Do not

use detergents;

 remove all accessories;

 do not place tea towels or pot holders over the

oven handle;

 turn the SELECTOR knob to the 0 position.

 If the oven is too hot, the pyrolytic cycle may not

start. Wait for the oven to cool down.

 The cycle may only be started once the oven door

has been closed.

To activate the PYROLITIC cleaning cycle, press

and hold the

button for approximately 4

seconds. The SET TIME KNOB may be used to

select the desired cleaning level; there are three

default time settings which cannot be modified.

1. Economy (ECO): turn the knob towards -.

Duration 1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards +.

Duration 2 hours.

4. Press the

button to confirm.

An end time for the PYROLITIC cycle (as for a

normal cooking cycle) may be programmed (see

Programming the automatic cleaning end time).

Safety devices

 the

icon on the display, when lit, indicates

that the oven door was automatically locked as

soon as the temperature reached a high value;

 the

icon indicates that the cleaning cycle

may be cancelled at any time by pressing the

button;

 if a malfunction occurs, the heating elements will

be switched off;

 once the oven door has been locked, you cannot

change the duration and cycle end time settings.

Programming the automatic cleaning end time

1. Press the

button until the icon and the two

numerical digits on the DISPLAY begin to flash.

2. Turn the SET TIME KNOB towards + and - to

adjust the hour value.

3. Press the

button again so that the other two

numerical digits on the DISPLAY begin to flash.

4. Turn the SET TIME KNOB towards + and - to

adjust the minute value.

5. Press the

button again to confirm.

6. When the set time has elapsed, the text END

appears on the display and a buzzer sounds.

 For example: it is 9:00 a.m. and the Economy

PYROLYTIC cycle has been selected: default set

duration 1 hour. 12:30 is scheduled as the end

time. The programme will start automatically at

11:30 a.m.

Programming has been completed when the

and

icons light up. The DISPLAY shows the

PYROLITIC cycle end time and duration alternately.

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the

oven has cooled down sufficiently before you can

open the oven door. You will notice some white dust

deposits on the bottom and the sides of your oven;

remove these deposits with a damp sponge once

the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in

which case it is not necessary to remove the

deposits, they are completely harmless and will not

affect your food in any way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes FN36XA in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes FN36XA Manual

Product: