Manual Scholtes fm 8861 mt (page 23 of 60) (English, German, Dutch, French, Italian)

330643

Zoom out

Zoom in

1/60

3. Secure the two

frames with the guide

rails using the holes

provided on the oven

walls (

see diagram

The holes for the left

frame are situated at

the top, while the holes

for the right frame are

at the bottom.

4. Finally, fit the frames on spacer A.

! Do not place the sliding racks in position 5.

Automatic cleaning with the PYROLYSIS

function

With the PYROLYSIS mode, the internal temperature

of the oven reaches 500°C. The pyrolytic cycle is

activated and burns away food and grime residues.

Dirt is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven due to

the spontaneous combustion process. There is no

cause for concern: this process is both normal and

hazard-free.

Before initiating the PYROLYSIS mode:

• Remove large or coarse food residues from inside of

the oven using a damp sponge. Do not use

detergents.

• Remove all accessories.

• Do not place tea towels or pot holders over the oven

handle.

! If the oven is too hot, the pyrolytic cycle may not

start. Wait for the oven to cool down.

! The programme may only be started once the oven

door has been closed.

To activate the PYROLYSIS mode, press the

button; the TIME display will show the default

duration of 1h30 (normal cycle) while the

TEMPERATURE display will indicate "nor"; pressing

the "+" button activates the intensive cycle "int",

which lasts 2h; the "-" button activates the economy

cycle "eco", lasting 1h.

Safety devices

• The door is locked automatically as soon as the

temperature exceeds a certain value.

• Should a malfunction occur, the heating elements

will switch off.

• Once the oven door has been locked, you cannot

change the duration and end time settings.

! Programming is possible only after selecting the

PYROLYSIS mode.

Programming delayed automatic cleaning

1. Press the

button; the button and the

numbers on the TIME display will flash.

2. To set the duration, press buttons "+" and "-";

press and hold to scroll the numbers quicker and

make setting easier.

3. Once the desired end of cooking time is reached,

wait 10 seconds for the selection to be memorized,

or press button

again to fix the setting.

4. When the selected time has elapsed, END appears

on the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO)

PYROLYSIS mode level has been selected: default

set time 1 hour. 12:30 is selected as the end time.

The programme will start automatically at 11:30 a.m.

Programming has been set when the

and buttons

flash. After programming, in the time before the

PYROLYSIS mode starts, the TIME display indicates

the duration and end of the PYROLYSIS mode

alternately.

To cancel a programming procedure press the “STOP”

button.

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the

oven has cooled down sufficiently before you can

open the oven door. You will notice some white dust

deposits on the bottom and the sides of your oven;

remove these deposits with a damp sponge once

the oven has cooled down completely. You may on

the other hand prefer to take advantage of the heat

accumulated to start cooking immediately; in this

case the dust can stay where it is: it is completely

harmless and will not affect your food in any way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes fm 8861 mt in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scholtes fm 8861 mt Manual

Product: