491195
19
Zoom out
Zoom in
Previous page
1/62
Next page
- 20 -
Pyrolysis
Precautions before pyrolysis
Remove the toughest grease and food spots and all substantial spills to avoid the risk of fire or smoke.
Remove all oven accessories, the frames and the sliding racks (if present) before running a pyrolysis
cycle. Extremely high temperatures may cause these accessories to become warped or discoloured.
Do not place tea towels over the oven handle to dry.
Running a pyrolysis cycle
1.
3.
2.
Turn to display the
PYROLYSIS menu
Turn to display
>ECONOMIC<
>NORMAL<,
>INTENSIVE<
Turn to select the
cycle
Press to confirm
your choice
When the temperature inside the oven exceeds 250°C, the oven door is
locked and a key appears on the display.
The door unlocks automatically when the temperature inside the oven
drops sufficiently: the key symbol is turned off.
Turn your oven off once the pyrolytic self-cleaning cycle has ended.
Turning off the oven
A series of beeps signals the end of the pyrolytic self-cleaning cycle.
Turn your oven off. Turn knob A towards the left to display STOP and then press knob A or knob B.
You may also turn knob A towards the right until icon
is displayed and then press knob A or knob B.
The display indicates
for as long as the temperature remains high.
During this time, you are not granted access to cooking (the display indicates AWAITING UNLOCKING).
NOTE
If you do not turn the oven off manually, the same will only turn off after a certain amount of time.
Important notes:
Keep young children away from the appliance as the accessible parts of the oven may become hot.
Avoid scratching the surface of the enamel coating with sharp objects such as knives, ...
Do not use abrasive detergents or products.
When cleaning, try to prevent any liquids from leaking into the oven door slots.
After pyrolysis, wait for the appliance to have cooled down completely and then remove the dust deposits which
formed as the food residue burned.
Clean the seals surrounding the oven door manually, as the self-cleaning cycle does not affect these areas.
To cut down on pre-heating times and therefore save on energy, we recommend:
you start a pyrolysis cycle straight after cooking,
or start cooking immediately after the pyrolysis cycle has been completed (the dust deposits that formed
during the cycle are completely harmless).
When looking through the oven door, you may notice some particles that light up as they are destroyed by pyrolysis
upon contact with the heating elements. This is simply spontaneous combustion: it is perfectly normal and hazard-free.
NOTE
To delay the start of a pyrolysis cycle, proceed in the same way as you would for a Succès cooking.
FOR ALL OVENS, PLEASE READ THE CHAPTER ENTITLED "OVEN CARE" IN THE TECHNICAL HANDBOOK.
4.
B
B B
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scholtes FG66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scholtes FG66 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info