740693

Schneider SLS4-90A Manual

44
Zoom out
Zoom in
Previous page
1/72
Next page
44
4. Remove the complete packaging materials before initial operation.
The appliance may be equipped with a transportation lock. Remove
the transportation lock completely. When removing be very careful.
Do not use any aggressive detergents to remove residues of the
transportation lock.
5. Clean and maintain the appliance regularly to enable its proper
operation and optimal performance.
6. Take the enclosed parts from the packaging and its polystyrene-
components.
7. Check that the power cord and the appliance are not damaged before
electrical connection.
8. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!
SAVE THESE INSTRUCTIONS.
The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
WARNING! Do not lead the exhaust air into a chimney which is used
for extracting exhaust air of appliances operated by gas or other
combustibles.
We recommend to carry out the installation of the extractor hood by
qualified personnel. Damages caused by improper installation of the
appliance are not subject to the guarantee or warranty!
1. For extracting the exhaust air always observe the current legal regulations.
2. The diameter of the exhaust hose must meet the diameter of the connecting ring.
3. The load-bearing capacity of the wall/ceiling of the installation room must be
checked before you install the appliance.
4. The appliance must be installed at a suitable position only.
5. Before you install the appliance, check that there are not any electrical or other
cables in the installation area; this prevents these cables from being drilled
unintentionally.
6. Clean the environment thoroughly before installation. This prevents dust or
rubble from being sucked in during initial operation of the appliance.
7. During installation ensure that the extractor hood is in horizontal position in
order to avoid accumulations of fat in one corner of the appliance.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schneider SLS4-90A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schneider SLS4-90A in the language / languages: English, German as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info