NOTICE! Aggressive detergents such as abrasive detergents, vinegar
cleaners, etc. damage the surface of the extractor hood.
5.1 Grease filters
WARNING! Failure to follow the cleaning instructions will increase the
RISK OF FIRE due to fat deposits.
NOTICE! The colour of the metal surface may change due to frequent
cleaning as well as the use of aggressive detergents. Such changes do
not influence the capacity of the appliance and are no reason for
complaint.
NOTICE! Do not damage the grid of metal-made (aluminium) grease
filters.
❖
Clean the filters by hand or in a dishwasher regularly (up to 30
0
C).
❖
Do not use any acrid or corrosive detergents.
❖
Do not use any abrasive detergents!
❖
Do not use any alkaline dishwasher-detergents! (pH more than 7).
CLEANING INTERVAL FOR ALUMINIUM GREASE FILTERS:
➢
Every 2 - 3 weeks according to the frequency of use of the extractor hood.
MANUAL CLEANING OF THE ALUMINIUM GREASE FILTERS:
1. Soak the aluminium grease filter(s) in warm rinse water (up to 30
0
C)
2. Then clean the grease filter(s) with a soft brush. Be careful not to damage the
grid of the grease filter(s).
3. After cleaning: Rinse the grease filter(s) thoroughly using hot water.
4. Repeat this process in case of stubborn soilings or deposits.
5. Dry the filter(s) properly before you reinstall it / them.
CLEANING OF THE ALUMINIUM GREASE FILTERS IN THE DISHWASHER:
❖
The grease filters can also be cleaned in the dishwasher: Normal programme (up to
30
0
C)
Do not put the filter(s) in the dishwasher together with tableware. Dry the
filter(s) properly before you reinstall it / them.