781864

Scheppach Wox D 700SL Manual

17
Zoom out
Zoom in
Previous page
1/48
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58 www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
17GB
1. Introduction
Manufacturer:
scheppach Fabrikation von Holzbearbeitung-
smaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear client,
We hope you enjoy your new rewood circular saw
and wish you success with it.
INFORMATION:
The manufacturer of this tool is, according to the
current product liability law, not liable for damages
caused to or by this tool because of:
• incorrect usage,
• failure to observe the manual,
• repairs by third parties, not authorized specialists,
• tting and exchange of non-original exchange
parts,
• non-intended use,
• falling out of the electrical installations because of
inobservance of the electrical Rules and VDE-Reg-
ulations 0100, DIN 57113 / VDE0113.
We recommend that you:
Read the entire operating instructions before
assembling and implementing.
This instruction manual should make it easier for you
to get to know your machine and to use its range of
applications as intended.
The manual contains important information on how to
work with the machine in a secure, correct and ef-
cient way, and how you can avoid risks, save repair
costs, reduce down time and increase the reliability
and life span of the machine.
Apart from the safety rules mentioned in these oper-
ating instructions, you should implicitly pay attention
to the valid regulations of your country for the use of
the machine.
Keep the manual, in a plastic cover protected against
dirt and humidity, with the machine. They should be
read and observed carefully by every member of staff
before starting to work. Only people instructed on
how to use the machine and informed about the pos-
sible risks, should be allowed to use it. The required
minimum age is to be adhered to.
Besides the safety instructions in this manual and the
special regulations of your country the recognized
technical rules for the operation of wood processing
machines need to be observed.
General instructions
• After unpacking please check all parts for possible
damage during transport. In case of complaints the
driver needs to be contacted as soon as possible.
• Complaints coming in later will not be recognized
as such.
• Familiarize yourself with the machine by means of
the operating instructions before implementing it.
• In case of replacing worn or exchange parts, as
for accessories, only use original parts. You can
obtain exchange parts at the specialized dealer.
• Upon ordering, please specify our article nº´s as
well as type and year of construction of the tool.
2. Safety instructions
• In these operation instructions we have indicated
positions that concern your safety, with this mark: m
• Take due note of all this information before and
while working with the saw.
• Do not lose these safety regulations.
• When equipment is not being used it should be
kept in a dry, closed place out of childrens reach.
• Keep mounted attachments sharp and clean to
enable you to work well and safely.
• Pay attention to - What you do. Always work in
accordance with the regulations. Do not use the
tool when you are tired.
• Do not use tools that do not allow to turned on and
off the switch.
• Warning! The use of other tools and accessories
may put you at risk of injury.
• Warning: Always unplug the power plug or remove
the spark plug connector prior to starting any of
the maintenance work described in this manual.
• Give these safety regulations to all persons who
work on the machine.
• Caution! Hands and ngers may be injured on the
rotating saw blade.
• Do not leave the saw in the rain and never use it
in damp or wet conditions.
• Provide good lighting.
• Do not saw near ammable liquids or gases.
• Wear suitable work clothes! Loose garments or
jewelry may become caught up in the rotating saw
blade.
• Non-slip shoes are recommended when working
outdoors.
• Wear a hair net if you have long hair.
• Avoid abnormal working postures.
• Operators must be at least 16 years of age.
• Keep children away from the machine when the
motor is running.
• Keep your workplace clean of wood scrap and any
unnecessary objects.
• An untidy work area invites accidents.
• Do not allow other persons, especially children, to
touch the tool. Keep them out of your work area.
• Persons working on the machine should not be
distracted.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Wox D 700SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Wox D 700SL in the language / languages: English, German, French as an attachment in your email.

The manual is 3.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info