4 І 28
Storage
Store the device and its accessories in a dark,
dry and frost-proof place that is inaccessible
to children. The optimum storage temperature
is between 5 and 30˚C.
Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine
GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoy-
ment and success.
NOTE:
According to the applicable product liability laws,
the manufacturer of the device does not assume
liability for damages to the product or damages
caused by the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized ser-
vice technicians,
• Installation and replacement of non-original
spare parts,
• Application other than specied,
Unpacking
• Open the packaging and remove the device
carefully.
• Remove the packaging material as well as
the packaging and transport bracing (if avail-
able).
• Check that the delivery is complete.
• Check the device and accessory parts for
transport damage.
• If possible, store the packaging until the war-
ranty period has expired.
ATTENTION
The device and packaging materials are
not toys! Children must not be allowed to
play with plastic bags, lm and small parts!
There is a risk of swallowing and suffoca-
tion!
Technical Specications
Dimensions
(LxWxH) in
mm 1160-2000 x 632 x 900-1000
Load in kg 250
Weight in kg 13,5
Maintenance
General maintenance measures
• We recommend that you clean the equipment
immediately after you use it.
• Clean the equipment regularly with a damp
cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive
to the plastic parts in the equipment. Ensure
that no water can get into the interior of the
equipment.