781900
22
Zoom out
Zoom in
Previous page
1/28
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
22 | GB
8. Assembly
1. Thread the mixing paddle (1) clockwise
into the mixing element (2). (Fig. 2)
2. Drive the assembled mixing paddle onto
the drive shaft (3). (Fig. 3)
DANGER!
Use only a mixing paddle that is de-
signed and suitable for the material to
be mixed. A wrong mixing paddle may
put strain on the power tool which may
damage the tool and lead to accidents!
Remove the mixing paddle from the drive
shaft by turning it anticlockwise. The paddle
may sit quite tight in its holding xture. If this
is the case, the xture must be secured with
a key against turning with the paddle. (Fig. 4)
m Warning!
Disconnect the machine from the power
supply before assembling or disassembling
the stirrer.
Failure to do so may result in accidental
starting and possibly serious injury.
9. Operation
Turning on (Fig. 1)
Press and hold the circuit breaker (5) for the
ON / OFF switch; now you can press the
ON / OFF switch (4) to start the handheld
mixer. Once the tool is running properly you
can release the ON / OFF switch, turning o󰀨
the circuit breaker (5).
Turning o󰀨 (Fig. 1)
Release the ON / OFF switch (4). The circuit
breaker for the ON / OFF switch (5) turns
o󰀨 automatically.
Speed controller (Fig. 5)
With the speed controller (6), the power
tool’s speed can be gradually adjusted.
The type of material to be mixed determines
the speed rate that is required. Practice will
teach you the optimal speed required by the
respective material.
7. Technical data
Nominal voltage 220-240 V~ 50 Hz
Power consumption 1200 Watt
Speed 0-700 min-1
Weight 4.8 kg
Mixer holding xture M14
Stirrer diameter 140 mm
Sound emission
Noise emission values are measured ac-
cording to the relevant standards.
Sound pressure level LpA 89 dB(A)
Uncertainty K 3 dB(A)
Sound power level LwA 100 dB(A)
Uncertainty K 3 dB(A)
Vibration ah5.67 m/s²
Uncertainty K 1.5 m/s²
The indicated vibration emission value
has been measured using a standardized
test procedure and can be used to com-
pare one electric tool with another;
The indicated vibration emission value
can also be used in a preliminary expo-
sure assessment.
Depending on how the power tool is used,
the vibration emission value may di󰀨er
from the specied value when the power
tool is actually used;
Try to keep the exposure to vibrations as
low as possible. Actions reducing the ex-
posure to vibration include, for example,
wearing gloves when the tool is used and
limiting the working time. Here, all aspects
of the operating cycle must be considered
(for example, the times when the tool is
turned o󰀨, and those when the tool is
turned on but running without load).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach TRW1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach TRW1200 in the language / languages: English, German as an attachment in your email.

The manual is 2.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info