781420
10
Zoom out
Zoom in
Previous page
1/48
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
10 | GB
6. Transport wheels
7. Feeder brushes
8. Belt drive
9. Sweeping brushes
3. Scope of delivery
Feeder brushes
Sliding handle
Lower push bar
Mounting screw sliding handle
Operation manual
Enclosed accessories bag
Flat round screw M8 x 25mm
Fillister head screw (self-tapping) 4,2 x 15 mm
4. Intended use
The machine is designed and built according to the
state-of-the-art and the safety-related standards.
Nevertheless, the use of the machine might involve
risks such as personal injury, danger to life for the
user or third parties, or damage to the machine and
other material property.
The machine is to be used only in a technically
awless condition as well as in accordance with
the manufacturer’s instructions and in a safety and
risk-conscious manner while adhering to the oper-
ating instructions! In particular, failures which may
impair the safety must be resolved immediately (by
you or an expert)!
Sweeping of at and dry surfaces e.g. entries,
terraces, courtyards, etc.
The machine may be operated only with original
parts and original accessories of the manufacturer.
Any other use above or beyond this is considered
improper use. The manufacturer is not liable for
damages resulting from this. The user shall bear
this risk alone.
The safety, work and maintenance instructions of
the manufacturer as well as the dimensions indicat-
ed in the Technical Data section must be adhered
to.
The relevant accident prevention regulations and
other generally recognised safety standards must
be observed.
The machine may be used, maintained or repaired
only by persons who are familiar with the machine
and the risks involved. Unauthorised modications
on the machine exclude any liability of the manu-
facturer for resulting damages.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.
1. Introduction
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
Improper handling,
Non-compliance of the operating instructions,
Repairs by third parties, not by authorized service
technicians,
Installation and replacement of non-original spare
parts,
Application other than specied.
We recommend:
Read through the complete text in the operating
instructions before installing and commission-
ing the device. If you give the equipment to any oth-
er person, give them these operating instructions as
well. The operating instructions are intended to help
the user to become familiar with the machine and
take advantage of its application possibilities in ac-
cordance with the recommendations. The operating
instructions contain important information on how to
operate the machine safely, professionally and eco-
nomically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine. In addition to the safety
regulations in the operating instructions, you have
to meet the applicable regulations that apply for the
operation of the machine in your country. Keep the
operating instructions package with the machine at
all times and store it in a plastic cover to protect it
from dirt and moisture. Read the instruction manual
each time before operating the machine and care-
fully follow its information. The machine can only be
operated by persons who were instructed concerning
the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.
2. Device description
1. Handle
2. Sliding handle
3. Mounting screw sliding handle
4. Lower push bar
5. Dirt collecting container
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Trike S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Trike S in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 2.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info