781429
26
Zoom out
Zoom in
Previous page
1/100
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 | GB
Adjustment of the oat switch
        -
mediate commissioning is possible.
For stationary installation the function

regularly (at least every three months).
      
that the switching point ON level and
the switching point OFF level can be
reached easily and with little expendi-
ture of energy.
Check this by placing the pump into a

switch carefully by hand and then low-
er it again. In this case, you can see
󰀨
     
     
      
  󰀨   
running dry and damage to the device.
Electrical connection
The electrical motor installed is connect-
ed and ready for operation. The connec-
tion complies with the applicable VDE
and DIN provisions.
Damaged electrical connection cable
The insulation on electrical connection
cables is often damaged.
This may have the following causes:
Passage points, where connection ca-
bles are passed through windows or
doors.
Kinks where the connection cable has
been improperly fastened or routed.
Places where the connection cables
have been cut due to being driven over.
Insulation damage due to being ripped
out of the wall outlet.
Check the proper status of the electri-
cal plug socket and make sure that the
󰀩
6 A). Insert the pump plug into the plug
socket and the pump is ready for oper-
ation.
Make sure that moisture or water nev-
er come in contact with the mains con-
nection.
There is a risk of electrocution.
9. Initial operation
m IMPORTANT!
You must fully assemble the appliance

Positioning/Hanging
The dimensions of the pump shaft must
be not less than 45 x 45 x 45 cm, in or-
       
freely.
The pump can be suspended by the

The pump can be suspended and/or re-
moved using a rope.
For safe suspension, loop the rope
around two of the holders of the han-
dle (1) and guide it upwards through the
handle (1).
Never suspend the pump by the hose.
Immerse the pump in the water to be
sucked in by forming an angle of 45
degrees (to reduce the amount of air
trapped in the pump body). If the pump


Make sure that there are no people in
the liquid to be pumped.
Connect the pump to the mains.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SWP800-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SWP800-2 in the language / languages: English, German, French, Swedish, Finnish as an attachment in your email.

The manual is 3.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info