782063
35
Zoom out
Zoom in
Previous page
1/116
Next page
35
m Electrical Connection
Connecting the electrical equipment, or any repair work,
may only be carried out by a qualified electrician.
The built-in electric motor is already connected and ready
for operation. The connection conforms to the relevant
VDE (German Association for Electrical, Electronic and
Information Technologies) and DIN (German Institute for
Standardization) regulations.
The connection to the mains supply made by the cus-
tomer, as well as the extension cord used, must comply
with these regulations.
Important Notes
Faulty power cords
Power cords often suffer insulation damage.
Causes are:
• Pinchingwhenpower cordsareroutedthrough win-
dows or door cracks.
• Bendingduetoimproperattachmentorroutingofthe
power cords.
• Cutsduetodrivingoverthepowercords.
• Insulationdamagecausedbyyankingthemainsplug
out of the power outlet.
• Cracksintheinsulationduetoageing.
Such faulty power cords must not be used and are a danger
to life because of the damaged insulation!
Inspect the power cords for damage on a regular basis.
Make sure that during this inspection the power cord is
not connected to the mains supply.
The power cords must comply with the applicable VDE
(German Association for Electrical, Electronic and In-
formation Technologies) and DIN (German Institute
for Standardization) regulations. Only use power cords
markedasH07RN.
A type identification printed on the power cords is pre-
scribed.
AC Motor
• Thepowersupplymustbe230V/50Hz.
• Extensioncordsmusthaveaminimumconductorcross
section of 1.0 square millimetres.
• Theconnectiontothepowersupplymustbeprotected
with a 16 A (delayed-action) fuse/ circuit breaker.
When you have questions, please include the following
details:
• Motormanufacturer
• Typeofcurrent
• Thedetailsfromthetypeplateofthemachine
• Thedetailsfromthetypeplateoftheswitch
Always send back the whole drive unit including the
switch, when you return the motor.
Nous recommandons un produit de vaisselle doux sur un
chiffon humide. La machine ne doit en aucun cas venir
en contact avec de l’eau.
m Raccordement électrique
Les raccordements et les réparations électriques ne peu-
vent faits que par un spécialiste en électricité.
Le moteur électrique est pr t à líemploi. Le raccordement
correspond aux normes VDE et DIN correspondantes.
Le raccordement au secteur du client ainsi que les câbles
à rallonge utilisés doivent correspondre à ces normes.
Informations importantes
Câbles électriques défectueux
Les câbles électriques présentent souvent des défauts
díisolation
Causes:
• Marquesdepressionsilescâblessontpassésparlíen-
trebâillement de fen tres ou de portes.
• Coudescausésparunexationouuneconduitenon
appropriée des câbles électriques.
• Coupuresduesàlíécrasementdescâbles
• Défautsdíisolationdusauxarrachementducâblede
la prise murale.
• Fissuresduesauvieillissementdelíisolation.
De tels câbles électriques défectueux ne peuvent pas tre uti-
lisés et représentent un danger mortel en raison des défauts
díisolation.
Contrôlez régulièrement si les câbles électriques ne sont
pas endommagés. Veillez à ce que les câbles ne soient
pas raccordés au secteur pendant le contr ôle.
Les câbles électriques doivent correspondre aux normes
VDE et DIN correspondantes. Utilisez uniquement des
câblesportantlesigleH07RN.
Líimpression de la désignation du type sur le câble est
obligatoire.
Moteur à courant alternatif
• Latensionduréseaudoittrede230Volt/50Hz.
• Lescâblesàrallongedoiventavoirundiamtreminimal
de 1,0 millim tre carré
• Leraccordementausecteurestsécuriséparunfusible
temporisé 16 A
Pour une demande de renseignement veuillez indiquer
les données suivantes:
• Fabricantdumoteur
• Typedecourantdumoteur
• Donnéesdelaplaquedetypedelamachine
• Donnéesdelaplaquedetypedelíinterrupteur
En cas de renvoi du moteur, renvoyez líunité de propul-
sion compl te avec líinterrupteur.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SP 52 Spero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SP 52 Spero in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 7.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info