782063
13
Zoom out
Zoom in
Previous page
1/116
Next page
13
vice raccorder la machine au réseau.
• Avantdequitterlepostedetravail,arrêterlemoteur
et débrancher la fiche d’alimentation.
Utilisation conformément à l’usage prévu
La machine est conforme à la directive machine CE en vi-
gueur.
• Avantdecommencerletravail,s’assurerquetousles
dispositifs de protection et de sécurité sont montés sur
la machine.
• Lamachineestconçuepourêtreopéréeparuneseule
personne. A l’intérieur de la zone de travail, l’opérateur
est responsable vis-à-vis de tiers.
• Observertouteslesinstructionsdesécuritéetdepro-
tection sur la machine.
• Conservertouteslesinstructionsrelativesàlasécurité
et aux dangers sur la machine complètes et parfaite-
ment lisibles.
• Pourl’exécutionstandarddelamachine,lesdimen-
sions maximales des pièces à usiner ne doivent pas
dépasser les dimensions de la table.
• Danslecasdedimensionsplusgrandesdespiècesà
usiner et qui permettent un basculement au bord du
plateau de la table, il y a lieu d’utiliser l’allongement
de table et/ou le chariot (accessoires spéciaux).
• Encasd’utilisationdansdeslocauxfermés,lamachi-
ne doit être équipée d’une installation d’aspiration.
• Lamachinenedoitêtreutiliséequesielleesttechni-
quement en parfait état. Elle doit être utilisée confor-
mément à l’usage prévu, compte tenu des instructions
d’utilisation et dans le respect des instructions de -
curité ! éliminer (ou faire éliminer) immédiatement
surtout les pannes susceptibles de compromettre la
sécurité !
• Ilconvientd’observerlesprescriptionsdesécurité,de
travail et de maintenance du fabricant ainsi que les
dimensions indiquées dans le caractéristiques techni-
ques.
• Ilconvientd’observerlesprescriptionsapplicablesde
prévention des accidents ainsi que les autres règles de
sécurité technique généralement reconnues.
• L’utilisation,lamaintenanceetlaréparationdelama-
chine sont réservées aux personnes qui la connaissent
bienetontreçuuneformationleurpermettantd’ap-
précier les dangers. Toute modification arbitraire de la
machine dégage le fabricant de sa responsabilité pour
les dommages pouvant être causés.
• Lamachinenedoitêtreutiliséequ’aveclesaccessoi-
res et outils d’origine en provenance du fabricant.
• Attention: L’emploi d’outils ou d’accessoires autres
que ceux spécifiés dans les instructions d’utilisation
peut entraîner des risques de blessure pour vous.
• Touteautreutilisationestconsidéréecommenecor-
respondant pas à l’usage prévu. Le fabricant n’est pas
responsable des dommages en découlant ; l’utilisateur
seul en porte la responsabilité.
• Utiliser des dispositifs ou colliers de serrage pour
maintenir la pièce à usiner. Cela est plus sûr que d’uti-
liser les mains et vos deux mains restent libres pour
conduire la machine.
Proper Use
The machine corresponds to the valid EEC machine guide-
lines.
• Beforestartingwork,allprotectionandsafetydevices
must be installed on the machine.
• Themachineistobeoperatedbyaperson.Theopera-
tor in the work area is responsible against any third
person.
• Followallsafetyandhazardinstructionsonthema-
chine.
• Keep allsafety and hazardinstructionsina legible
condition on the machine.
• Themaximumdimensionoftheworkpieceswhichcan
be worked on may not exceed the table size during the
standard version.
• With larger work piece dimensions, tipping of the
bench top is possible by table extension and/or using
the roll support (option).
• Forworkinclosedareasthemachinemustbeattached
to a ventilation system.
• Usethemachineonlyintechnicallyperfectaswellas
intended condition following the safety and drive-con-
scious conditions of manual use! In particular, breaks
of safety must be impaired and immediately eliminated
(leave)!
• Safety,Workandservicinginstructionsofthemanu-
facturer as well as the dimensions indicated in the
technical data must be maintained.
• Theapplicablerulesforthepreventionofaccidents
and other generally recognized safety-relevant rules
must be followed.
• The machinemay only beusedorrepaired bypeo-
ple trusted and informed about the hazards. Arbitrary
changes to the machine exclude the responsibility of
the manufacturer for damage resulting from it.
• Themachinemay beused onlywith originalacces-
sories and original tools from the manufacturer.
• Attention:Theuseoftoolsoraccessoriesotherthan
those given in the operating instructions can mean a
danger of injury to you.
• Eachusegoingbeyondtheinstructionsisnotconsid-
ered as intended. For damage resulting from such, the
manufacturer is not responsible; the risk for this is only
undertaken by the user.
• Useclampsorfasteningclampsinordertoholdthe
work piece. This is safer than the use of hands and
allows both hands to remain free to operate the ma-
chine.
• Donotleantoofarforward.
• Alwaysstandrmlyonthegroundandmaintainyour
balance.
• Alwaysconcentrateonthework.Think.Donotwork
on the machine if you are tired or under the influence
of drugs or alcohol.
• Examinethemachinefordamagedparts.Ifasafety
device or another part is damaged, check carefully
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SP 52 Spero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SP 52 Spero in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 7.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info