Manual Scheppach SM200L (page 17 of 92) (English, German, French, Italian)

781668

Zoom out

Zoom in

1/92

• for use in commercial, trade or industrial applica-

tions. Our warranty will be voided if the equipment

is used in commercial, trade or industrial business-

es or for equivalent purposes.

Residual risks

The machine is allowed to be used only for its in-

tended purpose! Even when the equipment is used

as prescribed it is still impossible to eliminate cer-

tain residual risk factors. The following hazards may

arise in connection with the machine‘s construction

and layout:

• Contact with the grinding wheel where it is not-

covered.

• Catapulting of parts from out of damaged grind-

ing wheels.

• Catapulting of workpieces and parts of workpiec-

es.

• Damage to hearing if essential ear-muffs are not

used.

• Lung damage if no suitable protective dust mask

is used.

• Health damage caused by hand-arm vibrations if

the equipment is used over a prolonged period or

is not properly guided and maintained.

• The use of incorrect or damaged mains cables can

lead to electrical injuries.

• Although having regarded all considerable rules

there may still remain not obvious remaining haz-

rds.

• Minimize remaining hazards by following the in-

structions in ”Safety Rules”, ”Use only as author-

ized” and in the entire operating manual.

5. Safety instructions

Caution! In order to protect yourself from the danger

of electric shock, injury or re when using electri-

cal power tools, please observe the following basic

safety precautions. Read all these requirements be-

fore you use the electrical power tool, and keep the

safety advice in a safe place.

Working safely

1. Keep your working area clean and tidy.

• A disorderly working area can lead to accidents.

2. Be aware of the effects of the environment.

• Do not leave electrical power tools out in the rain.

• Do not use electrical power tools in moist or wet

surroundings.

• Ensure that your working area is well lit.

• Do not use electrical power tools in areas where

there is risk of re or explosion.

3. Protect yourself from electric shock.

• Avoid touching earthed objects such as pipes,

heating radiators, ovens or refrigerators with parts

of your body.

4. Keep other people at a safe distance.

• Do not allow other people, in particular children, to

touch the electrical power tool or the mains lead.

Keep them away from your working area.

5. Store currently unused electrical power tools in

a safe place.

• When not being used electrical power tools should

be stored in dry conditions in a high or enclosed

place, out of reach of children.

6. Do not overload your electrical power tool.

• By keeping within the specied working range of

the tool you will work more safely and achieve a

better result.

7. Use the right electrical power tool for the task.

• Do not use low-output devices for heavy tasks.

• Do not use an electrical power tool for purposes

for which it was not intended. For example, do not

use a hand operated circular saw for trimming tree

branches or cutting logs.

8. Wear suitable clothing.

• Do not wear loose-tting clothing or jewellery.

They could become caught on moving parts.

• We recommend that you wear anti-slip footwear

when working outdoors.

• If you have long hair, wear a hair net.

9. Use personal protective equipment.

• Wear protective glasses.

• Wear a dust mask if your work generates dust.

10. Attaching the vacuum dust extraction device.

• Where there are connection points provided for

vacuum dust extraction please ensure that the

connections are made and used properly.

11. Do not use the mains lead for purposes for which

it was not intended.

• Do not use the mains lead to pull the plug out of

the mains socket. Protect the mains lead from

heat, oil and sharp edges.

12. Securely support the workpiece.

• Use clamps or a vice to grip the workpiece rmly.

This is much safer than holding it with your hand.

13. Avoid placing your body in an unnatural position.

• Keep proper footing and balance at all times.

14. Look after your tools carefully.

• Keep cutting tools sharp and clean. This way you

will work more safely and achieve better results.

• Follow the advice on tool lubrication and co suma-

bles replacement.

• Check the condition of the mains lead on your

electrical power tool regularly and have any dam-

age repaired by a competent specialist.

• Check the condition of extension leads regularly

and replace them if they are damaged.

• Keep handles and hand grips clean, dry and free

of oil and grease.

15. Pull the mains plug out of the mains socket.

• Do this if the electrical power tool is not being

used, before carrying out maintenance tasks on

the electrical power tool and whenever you are

changing inserted tools, e.g. saw blades, drills or

router bits.

16. Make sure that no spanners, keys etc. are left

attached.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SM200L in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SM200L Manual

Product: