782422
17
Zoom out
Zoom in
Previous page
1/180
Next page
17
• Always use the tools recommended in this manual
to obtain the best results from your cutting-off ma-
chine.
• Alwayskeephandsawayfromtheworkareawhenthe
ma chine is running; before performing tasks of any
kind release the main switch button located on the
handgrip, thus disconnecting the machine.
• Alwayskeephandsawayfromtheworkareawhenthe
machine is running; before performing tasks of any
kind release the main switch button located on the
handgrip, thus disconnecting the machine.
m Assembly
WARNING! For your own safety, never connect the plug to
power source outlet until all assembly steps are completed
and you have read and understood the safety and operational
instructions.
Lift the saw from the packaging and place it on your
work bench.
Installing the Dust Bag (Fig. 2)
• Squeezethemetalcollarwings2ofthedustbagand
put it on the motor area exhaust port 1.
Setting the Tool
Note:
This tool is accurately adjusted before shipping from the
factory. Check the following accuracy and readjust if nec-
essary in order to obtain the best results in operation.
Setting of the angular stops to 90° (Fig. 3)
• Releasetheanglearresterandmovethecuttinghead
to the very right. Lock the angle arrester (1).
• Utilizetheprotractorforsettingtheangleofthesaw
blade to 90° to the table. If a calibration is necessary
turn the screw (2) with the provided Allen key in a way
that the saw blade reaches 90° to the table.
• Settheangelindication(3)to0°usingthescrew.
tiques utiliser toujours les étaux appropriés: les piè-
ces soumises à la coupe doivent être bloquées dans
l’étau.
• Eviterdesdémarragesaccidentels:nepaspresserle
bouton-poussoir de marche pendant que vous insérez
la fiche dans la prise de courant.
• Utiliser les outils recommandés dans ce Manuel si
vous voulez que votre tronçonneuse vous assure des
prestations optimales.
• Eloignertoujourslesmainsdelazonedetravailpen-
dant que la machine est en service; avant d’effectuer
une opération de quelque nature que ce soit, relâcher
le bouton sur la poignée pour désactiver la machine.
m Montage
ATTENTION! Dans l’intérêt de votre sécurité, ne pas enficher
la fiche dans une prise de courant avant d’avoir terminé
toutes les étapes du montage et d’avoir lu et compris les
consignes de sécurité et le mode d’emploi.
Retirer la scie de son carton et la placer sur l’établi.
Installation du sac à poussière (Fig. 2)
• Pincerlesemboutsmétalliquesducollierdexation2
du sac à poussière pour emmancher le sac sur l’orifice
d’échappement de la zone du moteur 1.
Réglage de la scie
N. B.:
La scie a été ajustée avec précision en usine avant son
expédition. Pour obtenir les meilleurs résultats, faire les
vérifications suivantes de la précision et ajuster de nou-
veau au besoin.
Réglage des butées d’angle sur 90° (Fig. 3)
• Desserrerlelevierdeblocaged’angleetdéplacer
la tête porte-scie complètement vers la droite. Bloquer
le
levier de blocage d’angle (1).
• Utiliserlerapporteurdelatablepourréglerlalamede
scie sur 90°. Si un ajustement était nécessaire, tourner
la vis (2) avec la clé Allen fournie de telle façon que
la lame de scie soit placée dans un angle de 90° par
rapport à la table.
• Placerl’indicateurd’angle(3)aveclavissur0°.
BA sl 8-10 lxu.indd 17 28.02.11 11:01
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SL 1 0 LXU Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SL 1 0 LXU Woodster in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info