781925
47
Zoom out
Zoom in
Previous page
1/148
Next page
47
Componenti aggiuntivi da ssare alla macchina devono
essere localizzati e assegnati prima del montaggio.
Attenzione! Prima della messa in funzione, rabboc-
care con olio!
DOTAZIONE FIG. 1-3
1. Indicatore serbatoio
2. Tappo del serbatoio
3. 2 prese da 230 V~
4. Terminale di terra
5. Protezione contro i sovraccarichi
6. Voltmetro
7. Tappo a vite di riempimento dell’olio
8. Tappo a vite di scarico dell’olio
9. Protezione da carenza d’olio
10. Interruttore ON/OFF
11. Levetta dell’aria
12. Dispositivo di avvio a strappo
13. Rubinetto della benzina
14. Chiave della candela di accensione
Messa in funzione
Attenzione! Prima del primo utilizzo, rabboccare con
olio.
Prima di qualsiasi utilizzo, controllare il livello dell‘olio
con il motore spento e in supercie piana. Utilizzare olio
a quattro tempi oppure un olio HD di massima qualità
equivalente.
SAE 10W-30 è raccomandato per l‘uso generale a tutte
le temperature.
Vericare il livello dell‘olio, g. 4
Rimuovere il tappo di rabbocco dell‘olio (A) e lavare l‘a-
sticella di livello.
Controllare il livello dell‘olio spingendo l‘asticella di im-
mersione nel bocchettone, senza avvitare il tappo.
Qualora il livello dell‘olio fosse scarso, rabboccare con
olio raccomandato no al bordo inferiore del bocchettone
dell‘olio.
Sistema di allarme olio
Il sistema di allarme dell‘olio è predisposto in modo da
prevenire danni al motore dovuti a mancanza di olio
nell‘alloggiamento dell‘albero motore. Prima che il livel-
lo dell‘olio possa scendere nell‘alloggiamento dell‘albero
motore al di sotto del segno di sicurezza, il sistema di
allarme olio spegne automaticamente il motore (l‘inter-
ruttore d‘accensione resta in posizione ON). Se il si-
stema di allarme olio spegne il motore, rabboccare con
olio per motore.
Additional parts that are to be attached to the machine
must be located and allocated before assembly.
Attention! Fill the oil before commissioning!
LAYOUT ABB. 1-3
1 Tank indicator
2 Tank cover
3 2 x 230 V~ socket-outlets
4 Earth connection
5 Overload cut-out
6 Voltmeter
7 Oil ller screw
8 Oil drainage screw
9 Oil shortage cut-out
10 On/Off switch
11 Choke lever
12 Reversing starter
13 Petrol cock
14 Spark plug wrench
Commissioning
Attention! Fill the oil before rst use.
Before each use, check the oil level with the engine
switched off and on a level surface. Use the highest
quality four-stroke oil or an HD oil with the same level
of quality.
SAE 10W-30 is recommended for general use at all
temperatures.
Checking the oil level, g. 4
Remove the oil ller cap (A) and wipe the dipstick clean.
Check the oil level by inserting the dipstick into the lling
nozzle without screwing the cap on.
If the oil level is too low, rell with the recommended oil
up to the lower rim of the oil lling nozzle.
Oil warning system
The oil warning system is congured to avoid damage to
the engine due to a lack of oil in the spherical housing.
Before the oil level in the spherical housing can drop be-
low the safety level, the oil warning system automatically
cuts the engine off (the ignition switch remains in the ON
position). If the oil warning system cuts the engine off,
rell the engine oil.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach SG2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SG2600 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 9.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info