Manual Scheppach SD1600F (page 13 of 120) (English, German, Dutch, French, Italian, Polish)

782189

Zoom out

Zoom in

1/120

ADDITIONAL SAFETY RULES FOR SCROLL SAWS

• This scroll saw is intended for use in dry conditions,

and for indoor use only.

• Do not cut pieces of material too small to hold by hand

outside the blade guard.

• Avoid awkward hand positions where a sudden slip

could cause a hand to move into the blade.

• Always use the blade guard to avoid possible injury

due to blade breakage.

• Never leave the scroll saw work area with the power

01), or before the machine has come to a complete

stop.

• Do not perform layout, assembly or set up work on the

table while the cutting tool is in operation.

• Never turn your scroll saw on before clearing the table

of all objects: (tools, scraps of wood, etc) except for

the workpiece and related feed or support devices for

the operation planned.

m Proper use

CE tested machines meet all valid EC machine guidelines as

well as all relevent guidelines for each machine.

• The machine must only be used in technically perfect

con dition in accordance with its designated use and

the in structions set out in the operating manual, and

only by safety-conscious persons who are fully aware

of the risks involved in oerating the machine. Any

functional dis orders, especially those affecting the

safety of the machine, sholud terefore be rectiﬁed

immediately.

• The safety, work and maintenance instructions of the

manufacturer as well as the technical data given in

the calibrations and dimensions must be adhered to.

• Relevant accident prevention regulations and other,

gene rally recognized safety-technical rules must also

be adhered to.

• The machine may only be used, maintained, and

operated by persons familiar with it and instructed

in its operation and procedures. Arbitrary alterations

to the machine release the manufacturer from all

responsibility for any resulting damages.

• The machine may only be used with original accessories

and tools made by the manufacturer.

• Any other use exceeds authorization. The manufacturer

is not responsible for any damages resulting from un-

authorized use; risk is the sole responsibility of the

operator.

le concernant. Les travaux de réparation ne devraient

être exécutés que par une personne qualiﬁée utilisant

des piéces de rechange originales, car I’utilisateur

s’expose sinon à un danger majeur .

RÈGLES DE SÉCURITÉ SUPPLÉMENTAIRES POUR

LES SCIES À DÉCOUPER

• Cette scie à découper ne doit être utilisés que dans

des espaces secs et non à I’exterieur.

• Ne découpez pas en dehors de la tôle de protection

des objets trop petits pour être tenus dans la main.

• Ne mettez pas votre main dans des positions

défavorables où elle risque dans un glissement soudain

de passer facilement dans la lame de scie.

• Travaillez toujours avec la tôle de protection aﬁn de

ne pas risquer de vous blesser dans une craquelure

de la lame descie.

• Ne quittez jamais votre lieu de travail quand la scie à

découper est en marche ou que la machine n’est pas

encore tout á fait arrêtée.

• Pendant que I’outil à découper est en service, vous

ne devez pas exécuter de travail de tracé, de montage

ou de onstruction.

• Ne mettez en marche la scie à découper qu’après

avoir retiré de la table tous les objets (outils, éclisses,

etc.), excepté la piéce d’œuvre et les objets destinés

à I’alimentation ou à servir de support pour le travail

projeté.

m Utilisation conforme

La machine est conforme à la directive machines CEE en

vigueur.

• Les consignes de sécurité, ainsi que les prescriptions

pour le travail et la maintenance, fournies par le

fabricant doivent être respectées au même titre que

les dimensions indiquées dans les caractéristiques

techniques.

• Les consignes correspondantes pour la prévention des

accidents et les autres réglementations généralement

reconnues doivent être respectées.

• Seules des personnes compétentes ayant été initiées

et informées sur les dangers possibles ont le droit

de manier, d’entretenir ou de réparer la machine.

Des modiﬁcations sur la machine effectuées

sans autorisation entraînent une exclusion de la

responsabilité du fabricant pour tous dangers éventuels

en résultant.

• La machine ne doit être utilisée qu’avec des

accessoires et des outils d’origine du fabricant.

• Toute utilisation autre que celle spéciﬁée est

considérée comme non conforme. Le fabricant ne

peut être tenu responsable pour d’éventuels dommages

résultant d’une telle utilisation, seul l’exploitant en

est responsable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SD1600F in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2.55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SD1600F Manual

Product: