Manual Scheppach SB12 Woodster (page 9 of 60) (English, German, Italian, Finnish)

782161

Zoom out

Zoom in

1/60

Acoustic power level in dB

Idling LWA = 80.3 dB(A)

Finishing LWA = 100.2 dB(A)

Acoustic pressure level at working place in dB

Idling LWA = 64.1 dB(A)

Finishing LWA = 82.9 dB(A)

A measuring uncertainty coefﬁcient (K = 3 dB) applies

to the values listed above.

Dust emission parameters

The dust emission parameters measured according to the

principles for measuring dust emissions (concentration

parameters) for woodworking machines speciﬁed by the

German wood professional committee, are below 2 mg/

m³. Dust emissions can therefore be continuously kept

within the range allowed under currently valid German

regulations by connectingh the machine to a vacuum ex-

haust system with an airﬂow speed of at least 20 m/s.

Depending on the particular type of work piece, the stress

values of the manufacturer must be observed.

General notes

• After unpacking, check all parts for any transport dam-

age. Inform the supplier immediately of any faults.

• Later complaints cannot be considered.

• Make sure the delivery is complete.

• Before putting into operation, familiarize yourself with

the machine by carefully reading these instructions.

• Use only original Woodster accessories, wearing or re-

placement parts. You can ﬁnd replacement parts at

your Woodster dealer.

• When ordering, include our item number and the type

and year of construction of the machine.

In these operating instructions we have marked the places

that have to do with your safety with this sign: m

m Safety notes

• Please pass on safety notes and instructions to all

those who work on this machine.

• Personnel entrusted with work on the machine must

have read the operating instructions and in particular

the chapter on safety before beginning work. Read-

ing the instructions after work has begun, is too late.

This applies especially to persons working only oc-

casionally on the rnachine, e.g. during setting up or

rnaintenance.

• Observe all safety instructions and warnings attached

to the machine.

• See to it that all safty instructions and warnings at-

tached to the machine are complete and perfectly leg-

ible.

• Check all power supply lines. Do not use defective

lines.

• Make sure that the machine stands stable on ﬁrm

ground.

• Insure sufﬁcient lighting in the work area and the area

Akustisen tehon taso dB:nä

Joutokäynti LWA = 80,3 dB(A)

Jälkikäsittely LWA = 100,2 dB(A)

Akustisen paineen taso työpaikalla dB:nä

Joutokäynti LWA = 64,1 dB(A)

Jälkikäsittely LWA = 82,9 dB(A)

Mittauksen epävarmuuskerroin (K = 3 dB) pätee yllä lis-

tattuihin arvoihin.

Pölyemissioparametrit

Pölyemissiotasot, jotka on mitattu Saksan puuammat-

tilaiskomitean määrittelemien puuntyöstökoneiden

pölyemissioiden (konsentraatioparametrit) mittausperi-

aatteiden mukaisesti, ovat alle 2 mg/ m³. Pölyemissiot

voidaan täten pitää jatkuvasti

Saksan nykyisten voimassaolevien säännösten sallimalla

alueella kytkemällä kone vakuumi-imupoistojärjestel-

mään, jonka ilmanvirtauksen nopeus on vähintään 20

m/s. Työkappaleen tyypistä riippuen, valmistajan rasi-

tusarvoja tulee noudattaa.

Yleisiä huomautuksia

• Purettuasi koneen pakkauksesta, tarkasta kaikki osat

kuljetusvaurioiden varalta. Ilmoita toimittajalle vioista

välittömästi.

• Myöhempiä valituksia ei oteta huomioon.

• Varmista, että toimitus on täydellinen.

• Ennen käyttöönottoa, tutustu koneeseen lukemalla nä-

mä ohjeet huolellisesti.

• Käytä ainoastaan alkuperäisiä Woodster-lisälaitteita,

-kulutus-, tai -varaosia. Varaosia on saatavilla Woods-

ter-jälleenmyyjältä.

• Tilatessasi, mainitse nimikenumeromme ja koneen

tyyppi ja rakennusvuosi.

Näissä käyttöohjeissa, olemme merkinneet kohdat, jotka liit-

tyvät turvallisuuteesi, tällä merkillä: m

m Turvallisuushuomautuksia

• Välitä turvallisuushuomautukset ja -ohjeet kaikille tällä

koneella työskenteleville.

• Henkilökunnan, jonka vastuulle koneella työskentely

on annettu, tulee olla lukenut käyttöohjeet ja erityises-

ti turvallisuutta koskeva luku ennen työskentely aloit-

tamista. Ohjeiden lukeminen työn jo alettua on liian

myöhäistä. Tämä koskee erityisesti henkilöitä, jotka

työskentelevät ainoastaan silloin tällöin koneella, esim.

asennuksen tai kunnossapidon aikana.

• Noudata kaikkia koneeseen kiinnitettyjä turvallisuus-

ohjeita ja -varoituksia.

• Varmista, että kaikki koneeseen kiinnitetyt turvalli-

suusohjeet ja -varoitukset ovat täydellisiä ja täysin lu-

ettavissa.

• Tarkasta kaikki virtalähteen johdot. Älä käytä viallisia

johtoja.

• Varmista, että kone seisoo tukevasti vakaalla alustal-

la.

• Varmista riittävä valaistus työalueella ja konetta ym-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SB12 Woodster in the language / languages: English, German, Italian, Finnish as an attachment in your email.

The manual is 4.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SB12 Woodster Manual

Product: