Manual Scheppach SB08 Woodster (page 9 of 48) (English, German, French, Italian)

782162

Zoom out

Zoom in

1/48

VALEURS CARACTÉRISTIQUES DE BRUITS

selon la norme EN 3744.

Niveau de puissance acoustique indiqué en dB

Marche à vide LWA = 73,6 dB(A)

Usinage LWA = 92,8 dB(A)

Niveau de pression acoustique au poste de travail indiqué

en dB

Marche à vide LpAeq = 64,1 dB(A)

Usinage LpAeq = 82,3 dB(A)

Un supplément d’incertitude de mesure K = 3 dB est va-

lable pour les valeurs d’émission citées

Les passages relatifs à votre sécurité sont marqués de ce

signe dans ces instructions de service: m

m Consignes de sécurité

• Passez ces instructions de service à toutes les person-

nes travaillant sur la machine.

• Avant de commencer à travailler, le personnel m de-

vant travailler sur la machine doit avoir lu les instruc-

tions de service et notamment le chapitre „Consignes

de sécurité“. Il est trop tard lorsque le travail a dé-

jà commencé. Cette règle s’applique notamment au

personnel travaillant de manière intermittente sur la

machine, par ex. pour des opérations de réglage ou

d’entretien.

• Respecter toutes les consignes de sécurité et tous les

avertissements relatifs à la machine.

• Toutes les consignes de sécurité et tous les avertisse-

ments doivent être conservés intégralement près de la

machine et doivent être parfaitement lisibles.

• Vériﬁez les câbles de raccordement électriques. Ne pas

utiliser de lignes défectueuses.

• Veiller à ce que la machine soit installée sur une base

stable.

• Veiller que l’aire de travail et la zone autour de la ma-

chine soient sufﬁsamment éclairées. Attention: Lors

du travail sur la machine, il y a risque de blessure

pour les doigts et les mains du fait de la rotation de

l’outil de coupe.

• Tous les dispositifs protecteurs et tous les recouvre-

ments doivent être montés pour travailler sur la ma-

chine, le capot protégeant le ruban de la scie doivent

être fermées.

• Tenez les tierces personnes, en particulier les enfants,

à l’écart de votre plan de travail. Ne laissez personne

toucher votre outil ou le câble.

• Gardez la machine, même hors service, à l’abri des

enfants. Ne pas surcharger la machione et utilisezla

conformément à son affectation et en respectant le

mode d’emploi Il est recommandé de porter des chaus-

sures antidérapantes pour les travaux à l’air libre et

de bien garder son équilibre. N’utilisez pas le câble

pour des ﬁns pour lesquelles il n’a pas été conçu. les

arêtes vives.

• N’utilisez que des lames bien aiguisées pour votre sé-

curité. Tenez les poignées sèches et exemptes d’huile

et de graisse.

• Contrôlez toujours avant de mettre en circuit l’appareil

NOISE PARAMETERS ACCORDING TO EN 3744.

Sound level in dB

Idle running LWA = 73,6 dB(A)

Operation LWA = 92,8 dB(A)

Sound level at the workplace in dB

Idle running LpAeq = 64,1 dB(A)

Operation LpAeq = 82,3 dB(A)

A measurement uncertainty allowance K = 3 dB applies

to the mentioned emission values.

In these operating instructions we have marked the places

that have to do with your safety with this sign: m

m Safety notes

• Please pass on safety notes and instructions to all

those who work on this machine.

• Personnel entrusted with work on the machine must

have read the operating instructions and in particular

the chapter on safety before beginning work. Read-

ing the instructions after work has begun, is too late.

This applies especially to persons working only oc-

casionally on the rnachine, e.g. during setting up or

rnaintenance.

• Observe all safety instructions and warnings attached

to the machine.

• See to it that all safty instructions and warnings at-

tached to the machine are complete and perfectly leg-

ible.

• Check all power supply lines. Do not use defective

lines.

• Make sure that the machine stands stable on ﬁrm

ground.

• Insure sufﬁcient lighting in the work area and the area

around the machine.

• Caution when working: There is a danger to ﬁngers and

hands from the rotating tool.

• During the operation of the machine all safety devices

and covers must be mounted, and the door protecting

the saw blade must be closed.

• Keep away other persons, in particular children, from

your working area and the machine connected to the

mains as well as from the supply lines.

• Make sure that children cannot access the machine

while it is not in use.

• Do not overload the device and use it only within the

performance range according to the technical speci-

ﬁcations contained in the operating instructions. If

you work with the machine outside, make sure it is

in an upright position, and wear shoes with an anti-

slip sole.

• Do not use the cable for other purposes than it is in-

tended for. Protect it from heat, oil, and sharp edges.

Only use wellsharpened saw blades to make your work

more effective and safe.

• Make sure the handles are dry, clean, and free from

oil and grease.

• Make sure that wrenches and adjustment tools have

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach SB08 Woodster in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach SB08 Woodster Manual

Product: