782076
29
Zoom out
Zoom in
Previous page
1/156
Next page
29
Single-phase motor, Fig. 12
The voltage of the power supply must be 230 V / 50
Hz.
Extension cables up to a length of 25 m must have a
cross-section of 1.5 mm², and beyond 25 m at least 2.5
mm².
The connection to the mains must be protected with a
16 A slow-acting fuse.
In the event of enquiries please specify the following da-
ta:
Motor manufacturer
Type of current of the motor
Data recorded on the machine's rating plate
Data recorded on the switch's rating plate
If the motor has to be returned, it must always be dis-
patched with the complete driving unit and switch.
Important spare parts
Part Part number
Planer/Thicknesser knives, set = 2 pieces
390 2202 701
Motor 230 V 390 2202 010
Switch 230 V 390 2202 011
Flat belt 390 2202 012
EC declaration of conformity
We hereby declare Woodster GmbH, Günzburger Strasse 69, D-89335
Ichenhausen, that the machine indicated below, on the basis of its design,
construction and the version which we have brought to market, meets the
relevant EC requirements stated below.
This declaration is invalid if any changes to the machine are made without our
agreement.
Description of the machine
Planing machine
Machine type
pt 85
Relevant EC guidelines
EC machine guideline, EC low voltage guideline 72/23/EWG, last modification by
guideline 93/68/EWG, EC EMG guideline 89/336/EWG, last modified by guideline
93/68/EWG
Harmonized European standards applied, especially
EN 292-1, EN 292-2, EN 294, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-
3-11, 61029-1
Notified body
V Rheinland, Product Safety
Am Grauen Stein
D-51105 Köln
Engaged for
EC type examination no. BM60009799
GS examination no. S50048839
Place, Date
Ichenhausen, 11 April 2005
Signature
Thomas Honigmann
Moteur monophasé, Fig. 12
La tension du secteur doit être de 230 V / 50 Hz.
Les câbles de rallonge d’une longueur maximale de 25
m doivent présenter une section transversale de 1,5
mm², ceux d’une longueur supérieure à 25 m doivent
présenter une section transversale de 2,5 mm².
Le branchement au seau est équipé d’un fusible à
action retardée de 16 A.
En cas de questions suppplémentaires, veuillez fournir
des indications suivantes:
Fabricant du moteur
Nature du courant du moteur
Données se trouvant sur la plaque signalétique de la
machine
Données se trouvant sur la plaque signalétique du con-
cjonteur
En cas de renvoi du moteur, toujours envoyer l’unité mo-
teur complète avec le conjoncteur.
Pièces de réchange importantes
Article No. darticle
Fers de rabot, jeu = 2 pièces 390 2202 701
Moteur 230 V 390 2202 010
Conjoncteur 230 V 390 2202 011
Courroie plate 390 2202 012
Déclaration «CE» de conformité
Nous soussignés, Woodster GmbH, Günzburger Strasse 69, D-89335
Ichenhausen / Allemagne, déclarons par la présente, que la machine signée
ci-aps est conforme, en ce qui concerne la conception, sa forme d’exécution,
ainsi que le modèle distribué par nos soins, aux prescriptions fondamentales
applicables en matière de sécurité et d’hygiène des réglementations CE.
Cette déclaration est frappée de nullité en cas de modifications au niveau de la
machine, non autorisées par les soussignés.
signation de la machine
Raboteuse-gauchisseuse
Type de machine
pt 85
Réglementations CE
glementation CE relative aux machines applicables
98/37 CE
glementation CE relative à basse tension 72/23/CE, dans sa version 93/68/CE
glementation CE-EMV 89/336/CE, dans sa version 93/68/CE
Normes européennes harmonisées appliquées, particulièrement
EN 292-1, EN 292-2, EN 294, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-
3-11, 61029-1
Organisme notifiè
V Rheinland, Product Safety
Am Grauen Stein
D-51105 Köln
Interposé afin de
Effectuer la vérification «CE» de type no.BM60009799
Attestation GS no. S50048839
Lieu, date
Ichenhausen, 11 avril 2005
Signature
Thomas Honigmann
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PT85 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PT85 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info