782077
7
Zoom out
Zoom in
Previous page
1/120
Next page
7
p t 6 5
Extent of delivery
Planer/Thicknesser pt 65
Ripping fence
Assembling tools
Cutter block guard
Combined suction hood
Operating instructions
Technical data
Number of knives 2 pieces
Cutter block rpm 8500 1/min
Dimensions 700 x 390 x 435 mm
Weight 21 kg
Technical data – Surfacing
Max planing width 152 mm
Max chip removal 3 mm
Ripping fence l x h 500 x 90 mm
Ripping fence tilting
angle 90°–45°
Surfacing table size 655 x 160 mm
Technical data – Thicknessing
Max planing width 152 mm
Max planing thickness 120 mm
Max chip removal 2 mm
Thicknessing table size 255 x 200 mm
Drive
Motor V/Hz 230V / 50 Hz
Consumption power P1 1100 W
Subject to technical changes!
Noise parameters acc. to EN ISO 3744
The indicated rates are emission rates and do not cor-
respond with safe working rates. Although there is a cor-
relation between emission and immission levels, it is not
sure whether reliable precautions are necessary or not.
The following factors can influence the present immission
level at the working place: Time of impact, property of
working room, other noise sources (for instance, number
of machines and other neighbouring activities. The reli-
able working place rates can also vary from one country
to another. Yet this information should enable the user to
perform a better evaluation of the dangers and risks,
Acoustic power level in dB
IdlingLWA=93dB(A)withthicknessing
IdlingLWA=92dB(A)withsurfacing
FinishingLWA=98dB(A)withthicknessing
FinishingLWA=99dB(A)withsurfacing
Acoustic pressure level at working place in dB
IdlingLWA=78dB(A)withthicknessing
IdlingLWA=82dB(A)withsurfacing
FinishingLWA=83dB(A)withthicknessing
FinishingLWA=91dB(A)withsurfacing
Ameasuringuncertaintycoefcient(K=3dB)appliesto
the values listed above.
Dust emission parameters
The dust emission parameters measured according to
the principles for measuring dust emissions (concentra-
tion parameters) for woodworking machines specified by
the German wood professional committee, are below 2
mg/m³. Dust emissions can therefore be continuously kept
within the range allowed under currently valid German reg-
p t 6 5
Volume de livraison
Raboteuse-dégauchisseuse pt 65
Butéededégauchissage
Dispositif de protection
de l’arbre de rabotage
Capot combiné d’aspiration
Outils de montage dans un petit sac
Instructions d’utilisation
Dates techniques
Nombre de couteaux 2 pièces
Tr/mn de l’arbre de
rabotage 8500 1/min
Dimensions 700 x 390 x 435 mm
Poids 21 kg
Dates techniques – dégauchissage
Largeur de travail max. 152 mm
Envement de copeaux
max. 3 mm
Butée de
gauchissage l x h 500 x 90 mm
Plage de pivotement de
la butée 94
Table de
dégauchissage 655 x 160 mm
Dates techniques – rabotage
Largeur de travail max. 152 mm
Epaisseur de travail
max. 120 mm
Envement de copeaux
max. 2 mm
Table de rabotage 255 x 200 mm
Moteur
Moteur V/Hz 230V / 50 Hz
Aufnahmeleistung P1 1100 W
Sous réserve de modifications!
Paramètres du bruit selon EN ISO 3744
Les valeurs du bruit citées sont des valeurs émis et ne
correspondent pas toujours aux valeurs de travail sûres.
Bienqu’ilaitunecorrelationentrelesniveauxd’émission
et d’immission, il n’est pas possible d’en duire fiable-
ment si des précautions supplémentaires seront neces-
saires ou pas. Des facteurs pouvant influencer le niveau
d’immission sur le lieu de travail sont: Durée du bruit,
caractéristique de l’espace, d’autres sources de bruit etc.,
par exemple, la quantité d’autres machines en marche.
Les valeurs du bruit peuvent varier selon le pays. Cette
information doit mettre l’utilisateur en état d’évaluer les
dangers et les risques.
Niveau de puissance sonore en dB
MarcheàvideLWA=93dB(A)lorsdurabotage
MarcheàvideLWA=93dB(A)lorsdudégauchissage
TraitementLWA=98dB(A)lorsdurabotage
TraitementLWA=99dB(A)lorsdudégauchissage
Niveau de pression acoustique sur le lieu de travail en dB
MarcheàvideLWA=78dB(A)lorsdurabotage
MarcheàvideLWA=82dB(A)lorsdudégauchissage
TraitementLWA=83dB(A)lorsdurabotage
TraitementLWA=91dB(A)lorsdudégauchissage
Pour les valeurs d’émission citées, il faut tenir compte
d’uneincertitudedemesurageK=3dB.
Données concernant les émissions de poussières
Les valeurs de la poussière émise, mesurées selon les
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PT 65 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PT 65 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info