Manual Scheppach PS 1000-45 Matrix (page 21 of 47) (English, German)

782271

Zoom out

Zoom in

1/47

that one hand is placed on the main handle and

the other on the front handle.

4 When using a guide rail, it must be fastened

with screw clamps.

5 Make sure the power cable is not placed in the

sawing direction.

Sawing

1 Place the front part of the machine onto the

work piece.

2 Switch the machine on using the on/o switch

(4).

3 Press the plunge-cut trigger (3).

4 Push the saw downwards to reach the sawing

depth.

5 Push the saw forward evenly.

6 After nishing the sawing cut, switch the

machine o and move the saw blade upwards.

Plunge-cuts, Fig. 9

1 Place the saw onto the work piece.

2 Place the cutting indicator with the rear arrow

(A) on the deepest plunge-cut position.

3 Switch the machine on and push the saw

downwards until you reach the set cutting depth.

4 Move the saw forwards until the cutting

indication (C) has reached the marked point.

5 After completion of the plunge-cut, move the

saw blade upwards and switch the saw o.

Cutting with rails (otional)

1 Place the machine in the guide rails. can be

readjusted using the hex driver included in the

delivery, when there is the risk of the adjusting

screws releasing by themselves.

2 Turn on the machine by pressing the on/o

switch (4).

3 Press the dip trigger (3).

4 Press the saw downwards to reach the sawing

depth.

During rst use the rubber lip is sawn o and

thus splitter protection is guaranteed up to the

saw blade.

5 Push the saw uniformly forwards.

6 Turn o the machine and tilt the saw blade to

the top when the saw cutting is complete.

Sawing with dust suction

Connect the suction hose to the exhaust nozzle -

Ø 38 mm (12).

Electrical connection

The installed electric motor is completely

wired ready for operation.

The customer’s connection to the power

supply system, and any extension cables

that may be used, must conform with local

regulations.

Defective electrical connection cables

Electrical connection cables often suer

insulation damage.

Possible causes are:

• Pinch points when connection cables are run

through window or door gaps.

• Kinks resulting from incorrect attachment or

laying of the connection cable.

• Cuts resulting from running over the connecting

cable.

• Insulation damage resulting from forcefully

pulling out of the wall socket.

• Cracks through aging of insulation.

Such defective electrical connection cables must

not be used as the insulation damage makes

them extremely hazardous.

Check electrical connection cables regularly for

damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PS 1000-45 Matrix in the language / languages: English, German as an attachment in your email.

The manual is 3.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach PS 1000-45 Matrix Manual

Product: