15
GB
the type and year of construction of the machine.
In these operating instructions we have
marked the places that have to do with your
safety with this sign:
General safety instructions for power
tools
• WARNING Read all warnings and instructions.
Failure to apply all warnings and instructions can
lead to electrical shock, re and/or serious injury.
• Keep all warnings and instructions handy for
future consultation.
• The term “power tool” used in the warnings
refers to power tools that are connected to a
source of electrical energy (with an electrical
cable)
1) Workplace safety
a) Keep your working area clean and well lit.
Cluttered or dimly lit workspaces can lead to
accidents.
b) Do not operate power tools in areas where
explosions could take place, or in which
ammable liquids, gases or dust are present.
Power tools can create sparks, which can cause
dust or fumes to ignite.
c) Keep children and bystanders away from the
power tool when it is being used. Distractions
could cause you to lose control over the
equipment.
2) Electrical safety
a) The terminal plug of the tool must t into the
outlet.
The plug may not be modied in any way.
Do not use an adaptor plug together with
grounded power tools. The original plugs and the
appropriate outlets reduce the risk of an electrical
shock.
b) Avoid contact with grounded surfaces, such as
pipes, radiators, stoves and refrigerators. There is
an increased risk of electrical shock, if your body
is grounded.
c) Keep power tools away from rain or wet
conditions.
Mitre square: 0°–45°
Depth of cut 90° mm: 45
Depth of cut 45° mm: 35
Weight kg: 4,2
Drive
Motor V/Hz: 230-240/50
Input W: 1010
Protection class: II
Operating noise level and vibrations
Sound pressure level LpA: 87,7 dB(A), KpA: 3 dB(A)
Sound power level LwA: 98,7 dB(A), KwA: 3 dB(A)
Typical weighted vibrations ah = 2,1 m/s²,
K = 1,5m/s²
Measured values corresponding to EN 60 745-2-5
and EN 60 745-1
Subject to technical modications!
Warning: Noise can have adverse health eects.
Should the noise level increase above 85 dB(A),
you must wear ear protection. Should the
electrical supply not be optimal, then the current
can drop for a short time when the machine is
turned on. This can inuence other equipment
(for example, the blinking of a lamp). Should the
electrical capacity have a Zmax < 0.27, such
disturbances are not to be expected. (Should you
have diculties, please consult your local dealer.)
General notes
• After unpacking, check all parts for any
transport damage.
Inform the supplier immediately of any faults.
• Later complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize
yourself with the machine by carefully reading
these instructions.
• Use only original Matrix accessories, wearing
or replacement parts. You can nd replacement
parts at your Matrix dealer.
• When ordering, include our item number and
