www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
15 І 64
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
Storage
Store the device and its accessories in a dark, dry and
frost-proof place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.
Possible faults
Problem Possible cause Remedy
Motor does not start.
No power supply (power failure) Check fuses
Mains cable defective.
Exchange defect cable, respectively check
extension cable, (by electrician)
Never use defect lead
Motor or switch defect To correct the problem, refer to the manuf-
acturer or other approved service centre.
Unusual vibrations
Beater defective. Replace the beater.
Chuck defective. To correct the problem, refer to the manuf-
acturer or other approved service centre.
Non-intended material to be mixed. Incorrect processing. Follow the processing
instructions from the supplier.
Device starts but blocks under
slight load and cuts off automa-
tically.
Extension cable too long, or crosssection
too small.
Extension cable at least 1,5 mm2 , maximum
25 m long.
Socket too far away from main connection,
and cross-section of connection lead too
small.
Cross- section of at least 2,5 mm2 in longer
cables.
