781484
28
Zoom out
Zoom in
Previous page
1/148
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
28 |
12. Electrical Connection
   -
ate state. The connection corresponds to the relevant

The mains connection at the customer’s work place
and the extension cable used must correspond to
these regulations.
Faulty electrical connecting leads
-
ing leads.

Pressure marks caused when connecting leads
are run through windows or the cracks of doors.
-
ning of the connecting leads.

lead.

the connecting lead from the wall socket.


-
sulation damage.
-
age. Ensure that the connecting lead is not attached

Electrical connecting leads must correspond to the
       -

-


16A or K 16A fuse for machines with a high start-up

13. Cleaning, maintenance and or-
dering spare parts
General maintenance measures
    󰀨     


oil the motor.
-
ucts.
m WARNING! Pull out the power plug before perform-

13.1 Cleaning
Keep protective devices, air vents and the motor

          󰀨
with compressed air at low pressure.





parts of the device. Make sure that no water can

electrical device increases the risk of an electric
shock.

regular basis.

13.2 Maintenance
13.2.1 Machine (g. 21 + 22)



Threaded rod for adjusting the height of the planer



The feed table, discharge table, planing table, feed/

be kept free from resin. Soiled feed/discharge rollers
or anti-return claws must be cleaned. To prevent the
motor from overheating, dust that settles in the venti-
lation openings must be removed on a regular basis.
-

13.2.2 Cutting tool

-
in remover.
13.3 Ordering spare parts::
Please provide the following information when order-
ing spare parts;

• Device article number

• Spare part number of the required spare part
        
-

Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PLM1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PLM1800 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 6.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info