Manual Scheppach PL285 (page 16 of 56) (English, German, Dutch, French, Italian, Spanish)

757189

Zoom out

Zoom in

1/56

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

16 І 56

c) Keep power tools away from rain or wet conditions.

Penetration of water into the power tool increases the

risk of electrical shock.

d) Do not use the cable for any purpose other than that

for which it was made. Do not use it to carry the tool,

hang it up, or to pull the plug out of the outlet. Keep the

cable away from heat, oil, sharp corners or parts of the

equipment that move. Damaged or entangled cords in-

crease the risk of electrical shock.

e) When operating the power tool outdoors, only use

extension cords that are suitable for outdoor use. The

use of an appropriate extension cord reduces the risk

of an electrical shock.

f) If the power tool must be used in a damp environment,

use a residual current protective device. The use of such

a device reduces the risk of electrical shock.

3) Personal safety

a) Be attentive, watch what you are doing and use the

power tool sensibly. Do not use power tools when you

are tired or under the inuence of drugs, alcohol or me-

dicines. One moment of inattention while using a power

tool can result in serious injury.

b) Wear personal protective equipment and always wear

protective glasses. Wearing personal protective equip-

ment, such as a dust mask, slip-free safety shoes, pro-

tective headwear or ear protection, depending on the

type and use of a power tool reduces the risk of injury.

c) Avoid unintentional start-ups. Make sure that the po-

wer tool is shut off before it is connected to the power

supply, or is carried. If you have your nger on the switch

of the tool while carrying it, or have the tool turned on,

or connected to a power supply, this behaviour can lead

to accidents.

d) Remove the adjustment aides or the spanners before

turning on the power tool. A tool or wrench that is located

in a rotating part of the machine, can lead to injuries.

e) Avoid abnormal posture. Make sure that the operator

is standing rmly and can maintain balance. This allows

the operator to maintain control over the power tool in

unexpected situations.

f) Wear appropriate clothing. Do not wear loose clothing

or jewellery. Keep hair, clothing and gloves away from

the moving parts. Loose clothing, jewellery or long hair

can get caught in the moving parts.

g) If dust vacuums or catching systems can be installed

on the tool, make sure that these are correctly connec-

ted and assembled. The use of a dust exhaust unit can

reduce hazards caused by dust.

4) Use and treatment of the power tool

a) Do not overtax the tool. Use the appropriate tool for

the work that is to be done. With the correct power tool,

you can work better and more safely.

b) Do not use a power tool where the switch is defective.

A power tool that cannot be turned on and off is dange-

rous and must be repaired.

c) Disconnect the plug from the wall outlet before you

make adjustments to the tool, change parts or put the

tool away. This precaution prevents inadvertent start-

ups of the tool.

Ambient conditions

The machine may be operated:

humidity max. 70%

temperature von +5°С bis +40°С

The machine shall not be operated in areas exposed

to increased re or explosion hazard.

Prohibited use

• The operation of the machine outside the stated

technical limits described in this manual is forbidden.

• Operation of the machine function without emergen-

cy device is prohibited.

• The use of the machine not according with the requi-

red dimensions is forbidden.

• The use of the machine not being suitable for the

use of the machine and not being certied is forbid-

den.

• Any manipulation of the machine and parts is forbidden.

• The use of the machine for any purposes other than

described in 12.1 is forbidden.

• The unattended operation on the machine during the

working process is forbidden!

• It is not allowed to leave the immediate work area

during the work is being performed.

m Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the machine is

used in commercial, trade or industrial businesses or

for equivalent purposes.

5. General safety instructions for

power tools

• WARNING Read all warnings and instructions. Fai-

lure to apply all warnings and instructions can lead to

electrical shock, re and/or serious injury.

• Keep all warnings and instructions handy for fu-

ture consultation.

• The term “power tool” used in the warnings refers

to power tools that are connected to a source of

electrical energy (with an electrical cable)

1) Workplace safety

a) Keep your working area clean and well lit. Cluttered

or dimly lit workspaces can lead to accidents.

b) Do not operate power tools in areas where explosions

could take place, or in which ammable liquids, gases or

dust are present. Power tools can create sparks, which

can cause dust or fumes to ignite.

c) Keep children and bystanders away from the power

tool when it is being used. Distractions could cause you

to lose control over the equipment.

2) Electrical safety

a) The terminal plug of the tool must t into the outlet.

The plug may not be modied in any way. Do not use an

adaptor plug together with grounded power tools. The

original plugs and the appropriate outlets reduce the risk

of an electrical shock.

b) Avoid contact with grounded surfaces, such as pipes,

radiators, stoves and refrigerators. There is an increased

risk of electrical shock, if your body is grounded.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PL285 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach PL285 Manual

Product: