Manual Scheppach PDP2000 Kity (page 11 of 44) (English, German, Dutch, Danish, French, Italian, Polish, Swedish)

782134

Zoom out

Zoom in

1/44

■FUNCTION: BLOWING OUT, OFF AND UP FIG. 4-7

The conversion of the device for blowing out

can be done in a few simple steps.

Remove the connection nozzle (14) from the

suction side and insert on the

opposite side. (17)

Insert suction grating with lter on the suction

side.

Connect the suction hose and attach the

blowing nozzle (7).

Keeping the hole on the jet nozzle closed will

increase the blowing pressure.

Do not point the air ow at persons or

animals.

■ NOTES ON THE USE OF BOREHOLE-SUCTION NOZZLE FIG.8

Attach the drill suction nozzle (9) to the suction

hose.

Switch on the suction device and place the

drill suction nozzle onto the borehole. Due

to the vacuum, the nozzle sticks to level

surfaces.

■ USE OF THE INFLATION NOZZLE FIG. 9-10

The suction-blowing nozzle (7) can be used

for suction or inating of suitable objects. Set

the suction device to blowing mode. Place the

suction-blowing nozzle onto the suction hose.

Switch the suction device on.

By covering the borehole (a) on the nozzle,

you can regulate the airow

Electrical Connection m

Connections and repair work on the electrical

equipment may be carried out only by a quali-

ed electrician.

The installed electric motor is connected and

ready for use. The connection complies with

the relevant VDE and DIN regulations.

The connection to the mains supply provided

by the customer as well as the extension

cables must comply with these regulations.

Important notes

Faulty electric connecting cables

The electric connecting cables often have

insulation damages.

Possible reasons are::

• Pressure marks if connecting cables are fed

through window or door gaps.

• Kinks due to improper fastening or passing

of the connecting cable.

• Cutting points due to driving over connecting

cables.

• Insulation damages due to ripping cables out

of the wall socket.

• Cracks due to aging of the insulation.

Electric connection cables that are damaged

in this way may not be used and due to insula-

tion damages, they constitute a danger to life.

Check electric cables for damages regularly.

Make sure the connection cable is not connec-

ted to the power supply while checking it.

Electric connection cables must comply with

the relevant VDE and DIN regulations. Only

use connection cables with the H05VV-F

marking.

The norm stipulates that there must be a type

designation imprint on the connection cable.

AC motor

• The mains voltage must correspond to the

mains voltage indicated on the type plate.

• Extension cables must have a minimum

cable cross section of 1.0 square millimetres.

• The mains supply must be secured by a

suitable fuse.

In case of questions, please indicate the

following information:

• Motor manufacturer

• Type of motor’s current

• Data on the machine type plate

• Data on the switch type plate

If you return a motor, always send back the

entire drive unit with switch.

Cleaning, Maintenance and Repair

m WARNING

Always pull the mains plug out of the mains socket before carrying out any work on the electric tool itself (e.g. transport,

installation, conversion, cleaning and maintenance work)!

• Caution! Pull out the mains plug.

• Keep the suction device and the air vents

clean.

• Prior to starting your work, check the lling

level of the dust bag.

• Clean the suction device with a brush or

moist cloth.

• Do not use cleaning agents.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PDP2000 Kity in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 5.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach PDP2000 Kity Manual

Product: