781917
21
Zoom out
Zoom in
Previous page
1/188
Next page
21
Working position Fig. 2.4
In the working position, the entire trolley section is folded
up and latched into the hooks on the lower handle frame.
Transport Fig. 2.5
For transport purposes, the upper handle frame is folded
in, the trolley section is released from the hooks on the
lower handle frame and swung under the machine by lift-
ing it. The plate vibrator can now be moved.
Assembling the rubber mat Fig. 2.6
Fixing parts:
3 hexagon bolts M 10 x 30
3 spring washers A 10 mm dia.
For mounting the rubber mat, the machine with the rub-
ber plate has to be placed onto the rubber mat.
Fasten the rubber mat on the front side using the xing
bar, 3 hexagon bolts M 10 x 30 and 3 washers 10 mm
dia. each. Firmly tighten all bolts.
Attention:
Only use the rubber mat for vibrating concrete stones,
concrete plates and similar materials. For vibrating
gravel, stone chips and similar materials, the rubber mat
must be removed.
Pozycja robocza Rys. 2.4
W pozycji roboczej następuje uniesienie całego podwozia
i zahaczenie go za pomocą zapadek na hakach dolnego
uchwytu.
Transport Rys. 2.5
Do celów transportowych górny uchwyt zostaje rozłożony,
podwozie zostaje zwolnione z haków na dolnym uchwycie i
poprzez uniesienie zostaje wsunięte pod maszynę.
Teraz można poruszać wibratorem płytowym.
Mocowanie maty gumowej Rys. 2.6
Części mocujące
3 śrub sześciokątnych M 10 x 30
3 podkładek o średn. A 10 mm
W celu zamocowania gumowej maty urządzenie z gumową
płytą musi zostać umieszczone na gumowej macie.
Należy przymocować gumową matę na przedniej stronie za
pomocą elementu mocującego, 3 śrub z łbem sześciokąt-
nym M 10 x 30 i 3 podkładek o średnicy 10 mm. Mocno do-
kręcić wszystkie śruby.
Uwaga:
Maty gumowej używać wyłącznie przy obróbce płyt i po-
wierzchni betonowych lub podobnych materiałow. Przy ubija-
niu żwiru lub temu podobnych, matę gumową należy zdjąć.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach PC 1300 Kity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach PC 1300 Kity in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info