Manual Scheppach OX7-1600 (page 22 of 38) (English, German, French)

781945

Zoom out

Zoom in

1/38

english 17

We recommend the following hydraulic oils:

Q8 Haydn 46

Aral Vitam gf 22

BP Energol HLP-HM 22

Mobil DTE 11

Shell Tellus 22

or equivalent.

Do not use other oil grades! The use of other oil types af-

fects the function of the hydraulic cylinder.

Only when operated by PTO: change the oil of the trans-

mission gearing, Fig. 8, after the ﬁ rst 35 operating hours,

then after 1,000 operating hours or at least once per year.

Ensure that the connections of the hydraulic system do

not leak.

Hydraulic system

The hydraulic system is a closed system with oil tank, oil

pump and control valve.

The factory-made and completed system must not be mo-

diﬁ ed or re-engineered.

Check the oil level frequently.

Too low an oil level may damage the oil pump.

Check the hydraulic connections and screws for tightness

frequently – retighten if necessary.

Prior to maintenance and checking procedures, clean the

work space and have appropriate tools in good condition

to hand.

The above-indicated time intervals refer to normal terms of

use; if the machine is exposed to heavy load, those time

intervals decrease accordingly.

Clean the machine casing, the panels and the control le-

vers with a soft, dry cloth that you can moisten a little with

a neutral cleaning agent. Do not use alcohol or benzene

since they might damage the surfaces.

Keep oil and lubrication grease out of the reach of unau-

thorised personnel. Read the instructions on the contai-

ners carefully and observe them strictly. Avoid skin contact

and rinse well after use.

Accident Prevention Standards

The machine may only be operated by qualiﬁ ed personnel who

are well aware of the contents of this manual.

Before operating the machinery, you must check the integrity

of the safety mechanisms and ensure that they are working

properly.

Also before operation, you should familiarise yourself with the

machine controls, following the operating instructions.

The speciﬁ ed capacity of the machine must not be exceed-

ed. Under no circumstances the machine must be used for

anything else but its indented use.

All personnel must wear work clothes as stated in the regu-

lations of the country in which the machine is operated.

Wide, loose clothing, belts, rings, and necklaces should

not be worn. Long hair should be tied back.

Try to keep the working area tidy at all times. Tools, acces-

sories, and spanners should be kept within reach.

During cleaning or maintenance work the machine must

not be connected to the mains supply.

It is strictly prohibited to operate the machine without safe-

ty mechanisms or with safety mechanisms disengaged.

It is strictly prohibited to remove or modify safety mecha-

nisms.

You should not carry out any maintenance or adjustments be-

fore having carefully read this manual.

The given maintenance schedule must be observed for

safety reasons as well as to ensure that the machine per-

forms properly.

The warning labels must be always clean and legible and

must be observed in order to avoid accidents. If labels are

damaged or missing or belong to parts that were replaced,

then those labels must be replaced by original labels or-

dered from the manufacturer and be attached at the posi-

tions prescribed.

In case of ﬁ re, dry powder ﬁ re extinguishing agents must

be used. A burning machine must not be extinguished with

water because of the risk of a short circuit.

If the ﬁ re cannot be extinguished immediately, watch for

liquids leaking.

During a longer ﬁ re the oil tank or the pressurised lines can

explode: Therefore make sure that you are not getting into

contact with the leaking liquids.

Dismantling and Disposal

The machine does not contain any materials that are haz-

ardous to health or the environment, because it is manufac-

tured from materials that are either completely recyclable

or can be disposed in a normal way.

For disposal, you should use specialist companies or quali-

ﬁ ed personnel, who know the possible risks and have read

these operating instructions and follow them precisely.

If the machine falls into disuse, follow these steps under

observance of all applicable accident prevention meas-

ures:

• Disconnect the energy supply (electrical or PTO),

• Remove all electrical wires and hand over to a special-

ised collecting point, while observing national regula-

tions.

• Drain the oil tank and deliver the oil in a closed contain-

er to a collecting point, while observing national regula-

tions.

• Deliver all other machine parts to a scrap collection

point, while observing national regulations.

Make sure every part of the machine is disposed of in ac-

cordance with all applicable national regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach OX7-1600 in the language / languages: English, German, French as an attachment in your email.

The manual is 11.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach OX7-1600 Manual

Product: