781946

Scheppach OX 7-1010 Manual

22
Zoom out
Zoom in
Previous page
1/52
Next page
tightness frequently – retighten if necessary.
Prior to maintenance and checking procedures,
clean the work space and have appropriate tools
in good condition to hand.
The above-indicated time intervals refer to
normal terms of use; if the machine is exposed
to heavy load, those time intervals decrease
accordingly.
Clean the machine casing, the panels and the
control levers with a soft, dry cloth that you can
moisten a little with a neutral cleaning agent.
Do not use alcohol or benzene since they might
damage the surfaces.
Keep oil and lubrication grease out of the reach
of unauthorised personnel. Read the instruc-
tions on the containers carefully and observe
them strictly. Avoid skin contact and rinse well
after use.
Troubleshooting
In cases of errors not mentioned below, please contact the customer service of the company scheppach.
Error Possible causes Solution Degree of danger
The hydraulic pump does
not run
No voltage Check whether the conductors
have power supply
Danger of an electric shock
This work process must be
performed by a maintenance
electrician.
The thermo-switch of the motor has
turned itself off.
The thermo switch turns on again
when the motor has cooled down.
The motor can be re-started.
–
The column does not
move downwards
Low oil level Check the oil level and rell Danger of contamination!
This work process can be carried
out by the machine operator.
2-manual shift not correct Check the xing of the levers Risk of being cut!
Dirt in the column guide Clean the column
Motor starts but the
column does not move
downwards
Incorrect rotating direction of the
motor during three-phase current
Check rotating direction of the
motor and shift to correct direction
Incorrect rotating direction can
damage the pump
Maintenance and repairs
All maintenance procedures must be performed
by qualied personnel under strict observation
of the available operating manual. Prior to each
maintenance, all possible precautions must be
taken; turn off the motor and disconnect the
power supply (if necessary, unplug the power
plug). Place a sign on the machine which explains
the outage of the device “Machine out of service
due to maintenance: unauthorized persons are
not allowed to start up the machine or to remain in
close proximity.“
22
DGB
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach OX 7-1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach OX 7-1010 in the language / languages: English, German, French as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info