Manual Scheppach OSM100 (page 11 of 56) (English, German, French, Italian)

781480

Zoom out

Zoom in

1/56

english 11

14 Hook wrench SW 13

15 spindle thread M8

In these operating instructions we have marked the places

that have to do with your safety with this sign: m

m General Safety Rules

When using electric tools basic safety precautions should al-

ways be followowed to reduce the risk of ﬁre, electric shock

and personal injury.

• Keep guards in place and in working order.

• Remove adjusting keys and wrenches. Form the habit

of checking to see that keys and adjusting wrenches are

removed from the machine before turning it on.

• Keep the working area clean. Cluttered areas and

benches invite accidents.

• Don’t use in a dangerous environment. Don’t use power

tools in damp or wet locations, or expose them to rain.

Keep work area well lighted.

• Keep children away. All visitors should be kept at a safe

distance from the work area.

• Make your workshop kid proof. Lock your workshop.

Tools not used should be kept in a dry place, inacces-

sible for children.

• Don’t force the tool. It will do the job better and safer

at the rate for which it was designed.

• Use the right tool. Don’t force the tool or attachment

to do a job for which is was not designed.

• Use proper extension cord. Make sure your extension

cord is in good condition. When using an extension

cord, be sure to use one heavy enough to carry the

current your product will draw. An undersized cord will

cause a drop in voltage resulting in loss of power and

overheating.

• Wear proper clothing. Do not wear loose clothing,

gloves, neckties, rings, bracelets, or other jewelry which

may get caught in moving parts. Nonslip shoes are rec-

ommended. Wear protective hair covering to contain

long hair. Roll your sleeves up to above the elbows.

• Protect your eyes by safety goggles. Everyday eyeglasses

offer only little protection. They are no safety glasses.

Wear a face or dust mask when working in a dusty en-

vironment.

• Secure work. Use clamps or a vice to hold work, when

practical. It is safer than using your hand, and it frees

both hands to operate the tool.

• Don’t overreach. Keep proper footing and balance at all

times.

• Maintain tools with care. Keep tools sharp and clean

for best and safest performance. Follow the instructions

for lubricating, and changing accessories.

• Always disconnect the machine before servicing, and

when changing accessories, such as blades, bits, cut-

ters, and the like.

• Only use recommended accessories. Consult the operat-

ing instructions for the recommended accessories. The

use of improper accessories may cause risk of injury to

persons.

• Never stand on the machine. Serious injury could oc-

cur if the machine is tipped or if the cutting tool is

unintentionally contacted.

• Check for damaged parts. Before further use of the tool,

a guard or other part that is damaged should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment or

binding of moving parts, breakage of parts, mounting,

and any other conditions that may affect its operation.

A guard or other part that is damaged should be prop-

erly repaired or replaced.

• Direction of work. Push the workpiece towards the saw-

blade or cutter only in the moving direction of the tool.

• Never leave the machine unattended while it is running.

Wait until the tool has come to an absolute standstill,

before you leave the machine.

• Use the correct power connection. Do not pull the pow-

er plug to stop the machine during work. Never remove

the plug from the socket by pulling the extension cord.

• Always stay attentive to what you are doing, even when

using the machine regularly. Bear in mind that a frac-

tion of a second is sufﬁcient to cause an injury.

• Keep your safety in mind. Safety is a combination of

common sense and staying alert as long as the machine

is switched on.

• When used in enclosed rooms, the machine must be

connected to a dust extractor unit to remove wood chips

and sawdust. The air ﬂow rate at the suction connector

must be 20 m/s.

Additional safety rules for the oscillating spindle grinding ma-

chines

WARNING: Do not use your machine until it is completely

assembled and installed according to the instructions.

• If you are not familiar with the operation of the sanding

machine, ask the head of the department, your teacher,

or any other qualiﬁed person.

• ATTENTION: This machine has only been designed for

sanding wood or similar materials. The sanding of other

materials can cause ﬁre, injuries, or damage the prod-

uct.

• Always wear safety goggles.

• This machine may only be operated indoors.

• IMPORTANT: Mount and use the machine on a horizontal

surface. A non-horizontal surface can damage the mo-

tor.

• If the machine tends to tilt or walk (especially when

sanding long and heavy panels), it must be fastened to

a solid surface of sufﬁcient carrying force.

• Firmly hold the workpiece when sanding.

• Do not wear gloves. Do not hold the workpiece with a

cloth during sanding.

• Never sand workpieces too small to be held safely.

• Avoid awkward hand positions where a sudden slip

could cause your hand to touch the sanding belt or

disc.

• When sanding a large piece of material, provide an ad-

ditional support at table height.

• Never sand an unsupported workpiece. Secure the

workpiece with the table or the fence. Exceptions are

the sanding of curved workpieces on the outside of the

sanding disc.

• Always clear the table, fence or sanding belt of scraps

or other objects, before turning the machine on.

• Do not perform any layout assembly or set-up work on

the table while the sanding machine is in operation.

• Switch the machine off and pull the power plug from

the socket when ﬁtting or removing accessories.

• Never leave the working area of the sanding machine

while the tool is running, or as long as it has not come

to an absolute standstill.

• Always place the work piece on the grinding table. To

sharpen bent tools with the grinding disc, place them

securely on the table.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach OSM100 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach OSM100 Manual

Product: