781929
19
Zoom out
Zoom in
Previous page
1/60
Next page
19
Intended
Use
The conveyor belt is only intended for con-
veying logs of wood. Any use beyond this is
considered unintended. The owner of the
machine, and not the manufacturer, is re-
sponsible for all personal injury and proper-
ty damage arising from unintended use!
The intended use also includes reading this
operating manual and observing the instruc-
tions contained within it - especially the
safety instructions. Moreover, the intended
use also entails the completion of all inspec-
tion and maintenance work in the prescribed
time intervals.
Method of operation
The drive of the conveyor belt is provided
either by means of an electric motor or an oil
motor directly on the drive shaft.
In addition, the conveyor belt has the option
of folding it up in the centre. As a result, it
requires less storage space.
The conveyor belt may only be used, main-
tained or serviced by persons who are famil-
iar with it and have been informed of the
dangers.
Requirements for the user
No special knowledge of machine construc-
tion or electrical engineering are required
for the operation of the machine. However,
the operator must be at least 18 years of age.
The operator must be familiarised with the
machine and appropriately instructed by the
owner prior to the first time working with
the machine (see general safety regulations).
Safety shoes and close-fitting clothing must
be work for the operation of the machine.
In the event that the user is to perform
maintenance and service work, the user
must possess the necessary technical skills.
The operating personnel must be capable of
independently carrying out the following
tasks following the familiarisation period:
Inspection of the safety equipment prior
to beginning work and during operation.
Rectification of faults for which no voca-
tional training in the area of machine
construction or electrical engineering is
required.
Requirements for the mainte-
nance and service personnel
The present manual contains all necessary
information for the maintenance and setup
and is intended for trained personnel as-
signed with the following tasks:
Inspection, maintenance and service of
the machine.
Setup and adjustment of the machine.
Inspection of the safety equipment.
Performing of test runs.
Rectification of faults for which voca-
tional training in the area of machine
construction or electrical engineering is
required.
General safety guidelines
The following safety symbols are used in the
present operating manual.
Attention! Danger!:
Danger notices to pay
particular attention to.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Muli 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Muli 4000 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info