782298
15
Zoom out
Zoom in
Previous page
1/152
Next page
15
dis orders, especially those affecting the safety of the
machine, sholud terefore be rectified immediately.
• Anyotheruseexceedsauthorization.Themanufacturer
is not responsible for any damages resulting from un-
authorized use; risk is the sole responsibility of the
operator.
• Thesafety,workandmaintenanceinstructionsofthe
manufacturer as well as the technical data given in the
calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other,
gene rally recognized safety-technical rules must also
be adhered to.
• Themachinemayonlybeused,maintained,andoper-
ated by persons familiar with it and instructed in its
operation and procedures. Arbitrary alterations to the
machine release the manufacturer from all responsibil-
ity for any resulting damages.
• Themachinemayonlybeusedwithoriginalaccessories
and tools made by the manufacturer.
m Remaining hazards
The machine has been built using modern technology in
accor dance with recognized safety rules. Some remaining
hazards, how ever, may still exist.
• Onlyprocessselectedwoodswithoutdefectssuchas:
Branch knots, edge cracks, surface cracks. Wood with
such defects is prone to splintering and can be hazard-
ous.
• Woodwhichisnotcorrectlygluedcanexplodewhen
being processed due to centrifugal force.
• Trim work piece to a rectangular shape, center and
correctlysecurebeforeprocessing.Unbalancedwork
pieces can be hazardous.
• Longhairandlooseclothingcanbehazardouswhen
the work piece is rotating. Wear personal protective
gear such as a hair net and tight fitting work clothes.
• Sawdustandwoodchipscanbehazardous.Wearper-
so nal protective gear such as safety goggles and a dust
mask.
• Theuseofincorrectordamagedmainscablescanlead
to injuries caused by electricity.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaininghazardscanbeminimizedbyfollowingthe
instructionsin„SafetyPrecautions“,„ProperUse“and
in the entire operating manual.
• Do not force the machine unnecessarily: excessive
cutt ing pressure may lead to rapid deterioration of the
blade and a decrease in performance in terms of finish
and cutting precision.
• Whencuttingaluminiumandplasticsalwaysusethe
app ro priate clamps: all workpieces must be clamped
down firmly.
• Avoidaccidentalstarts:donotpressthestartbutton
while inserting the plug into the socket.
• Always use the tools recommended in this manual
ayant conscience du danger! Eliminer notamment (ou
faire éliminer) immédiatement toute panne susceptible
de compromettré la sécurité!
• Toutautregenred’utilisationestconsidérécommenon
conforme. Le constructeur n’assume pas de responsa-
bilité en cas de dommages dans ce cas; le risque est
à la charge de l’utilisateur seul.
• Lesconsignesdesécurité,detravail,etd‘entretien
du constructeur ainsi que les dimensions qui sont
indiquées dans les données techniques, doivent être
respectées.
• Respecterlesconsignesdepréventionantiaccidents
appropriées, ainsi que les autres règles de sécurité
techniques reconnues en général.
• Utilisation,entretien,miseenconditiondelamachine
scheppach uniquement par des personnes familiarisées
et qui sont informées des dangers inhérents. Toute ini-
tiative de modification de la machine exclut la respon-
sabilité du constructeur pour les dommages y faisant
suite.
• La machine doit être utilisée uniquement avec des
accessoires et des outils d’origine du constructeur.
m Risques résiduels
La machine est construite selon les règles de l’art et les
règles techniques de sécurité reconnues. Il est cependant
possible que des risques résiduels apparaissent pendant
le travail.
• Utilisezseulementdesboissélectionnés,sansdéfaut
tel que: Noeuds, fissures transversales, fentes super-
ficielles. Le bois défectueux a tendance à éclater et
présente des risques pour le travail.
• Lesmorceauxdeboisquin’ontpasétécorrectement
collés peuvent, en raison de la force centrifuge, explo-
ser pendant le travail.
• Avant de monter la pièce brute, la tailler en forme
carrée, la centrer et veiller au montage correct. Le
déséquilibrage de la pièce à usiner est source de bles-
sures.
• Risquespourlasantéprovenantdelapièceàusiner
en mouvement rotatoire en raison des cheveux longs
et de vêtements flottants.
• Risquespourlasantéparlespoussièresdeboisou
copeaux de bois. Porter des équipements de protection
personnels tels que protection des yeux et masque
antipoussière.
• Risquesélectriquessiutilisationdecâblesderaccor-
dement électriques non conformes.
• Deplus,malgrétouteslesprécautionsprises,desris-
ques résiduels non évidents peuvent exister.
• Les risques résiduels peuvent être minimisés si les
«Consignesdesécurité»etl’«Utilisationconformeà
la destination» ainsi que les Instructions d’utilisation
sont intégralement respectées.
• Nepasforcerinutilementlamachine:unepressionde
coupe excessive peut détériorer rapidement la lame et
réduire les prestations de la machine quant à la finition
et à la précision de coupe.
• Lorsdelacoupedel’aluminiumetdesmatièresplas-
tiques utiliser toujours les étaux appropriés: les piè-
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MSS 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MSS 10 in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info