782298
11
Zoom out
Zoom in
Previous page
1/152
Next page
11
clean for better and safer performance. Follow instruc-
tions for lubricating and changing accessories. Inspect
power cables periodically and if damaged have them re-
placed by an authorised service facility. Inspect exten-
sioncablesperiodicallyandreplaceifdamaged.Keep
handles dry, clean and free from oil and grease.
• Disconnecttools. Whennotinuse,beforeservicing
and when changing accessories such as blades, bits,
cutters, disconnect tools from the power supply.
• Removeadjustingkeysandwrenches.Formthehabit
of checking to see that keys and adjusting wrenches
are removed from the tool before turning it on.
• Avoidunintentionalstarting.Ensureswitchisin‘off’
position when plugging in.
• Useoutdoorextensionleads.Whenthetoolisused
outdoors, use only extension leads intended for outdoor
use and so marked.
• Stay alert. Watch what you are doing, usecommon
sense and do not operate the tool when you are tired.
• Checkdamagedparts.Beforefurtheruseofthetools,
it should be carefully checked to determine that it will
operate properly and perform its intended function.
Check the alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired
or replaced by an authorised service centre unless oth-
erwise indicated in this instruction manual. Do not use
the tool if the switch does not turn on and off.
• Warning.Theuseofanyaccessoryorattachmentother
than one recommended in this instruction manual may
present a risk of personal injury.
• Have your tool repaired by a qualied person. This
electric tool complies with the relevant safety rules.
Repairs should only be carried out by a qualified person
using original spare parts, otherwise this may result in
considerable danger to the user.
Additional Safety Rules For Mitre Saws
• Do not use saw blades which are damaged or de-
formed.
• Donotusethesawwithoutguardsinposition.
• Replacethetableinsertwhenworn.
• Donotusethesawtocutanythingotherthanwoodor
similar materials.
chaleur, de l’huile et de toute arête coupante.
• Immobiliserlespièces.Danslamesuredupossible,
utiliser des serre-joints ou un étau pour retenir la pièce
sur laquelle on travaille. C’est moins dangereux que de
la retenir à la main.
• Nepassemettreenporte-à-faux.Ilfauttoujoursêtre
bien d’aplomb et en position d’équilibre.
• Veilleraubonentretiendesoutils.Lesoutilsdecoupe
bien affutés et propres donnent de meilleurs résultats
et sont moins dangereux. Suivre les instructions pour
la lubrification et le changement des accessoires. Ins-
pecter périodiquement les cordons et les faire réparer
par un centre d’entretien agréé s’ils sont endommagés.
Inspecter les rallonges périodiquement et les remplacer
si elles sont endommagées. Veiller à ce que la poignée
des outils soit sèche et propre et qu’il ne s’y trouve pas
d’huile ou de graisse.
• Débrancherlesoutils.Quandonnes’ensertpas,dé-
brancher les outils, de même qu’avant de procéder à
leur entretien ou de changer d’accessoires comme les
lames, les forets et les coupoirs.
• Retirerlesclésderéglage.Prendrel’habitudedereti-
rer les clés de réglage de l’outil avant de le mettre en
marche.
• Eviter les démarrages accidentels. S’assurer que le
commutateur est en position d’arrêt avant de brancher
l’outil.
• Utiliserdesrallongesextérieures.Quandonsesertde
l’outil à l’extérieur, il ne faut utiliser que des rallonges
destinées à l’extérieur et désignées comme telles.
• Rester alerte. Faire attention à ce qu’on fait. Faire
preuve de bon sens et ne pas utiliser d’outil quand on
est fatigué.
• Vérierl’étatdel’outil.Avantd’utiliserl’outil,ilfaut
toujours le vérifier pour s’assurer qu’il fonctionnera
bien. Vérifier l’alignement des pièces mobiles et s’as-
surer qu’elles se déplacent sans gripper. Vérifier qu’il
n’y a aucune pièce ni aucun montage brisé ou toute
autre condition qui pourrait empêcher l’outil de bien
fonctionner. Sauf indication contraire, il faut faire ré-
parer ou remplacer par un centre de service agréé tout
dispositif de protection ou toute autre pièce en mauvais
état. Ne pas utiliser d’outil qu’il est impossible de met-
tre en marche et d’arrêter à l’aide du commutateur.
• Miseengarde.L’emploidetoutaccessoireautreque
ceux recommandés dans le manuel d’instruction risque
de causer des blessures.
• Faire réparerl’outilpar unepersonnequaliée. Cet
outil électrique est conforme à toutes les règles de
sécurité applicables. Sous peine de poser des risques
pour la personne qui l’utilise, il ne doit être réparé
que par une personne qualifiée, avec des pièces de
rechange d’origine.
Consignes complémentaires de sécurité pour scies à on-
glet
• Nepasutiliserdelameendommagéeoudéformée.
• Nepasutiliserlasciesanslesdispositifsdeprotection
en place.
• Remplacerlaplaqueamoviblequandelleestusée.
• Nepasutiliserlasciepourcouperdesmatériauxautres
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MSS 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MSS 10 in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info