782298
7
Zoom out
Zoom in
Previous page
1/152
Next page
7
Know your Pullover Mitre Saw (Fig. 1)
1 Pullover carriage
2 Upperbladeguard
3 Lower blade guard lock lever
4 Trigger switch
5 Handle
6 Motor
7 Lower blade guard
8 Tungsten Carbide Tipped blade
9 Fence
10 Extension support (optional)
11 Mitre scale
12 Arrester
13 Table insert
14 Turn table
15 Bolt holes
16 Base
17 Clamp
18 Dust bag
19 Handle
20 Laser
21 Table clamping handle
mss 8 mss 10
Scope of delivery
Mitre and Trim Saw
small parts
Operating instructions
Technical data
ø blade 210 mm 254 mm
ø bore 30,0 mm
Dimensions 780 x 460 x 485
mm
810 x 460 x 395
mm
Weight 13,5 kg 17,0 kg
ø turn table 250 mm
Mitre stops left and
right 0°, 15°, 22,5°, 30°, 45°
Pivoting range 45°/0°/4
Inclination range 0°45°
Max. Capacity
Cross cut at 90° 58 x 340 mm 78 x 340 mm
Mitre cut at 4 58 x 240 mm 78 x 240 mm
Becel cut at 45° 32 x 340 mm 42 x 340 mm
Compound cut at 45° 32 x 240 mm 42 x 240 mm
Drive
Motor V/Hz 230V / 50 Hz
Consumption power
P1
1500 W (S3
20%)
2000 W (S3
20%)
No load speed 5000 1/min
Laser class 2
Subject to technical changes!
The noise levels of this machine during cutting are as fol-
lows:
maximum sound pressure level: 99dB(A)
Apprenez à connaître votre scie à onglet radiale (Fig. 1)
1 Chariot coulissant
2 Protège-lame supérieur
3 Levier de blocage du protège-lame inférieur
4 Interrupteur-gâchette
5 Poignée
6 Moteur
7 Protège-lame inférieur
8 Lame à pointes carburées
9 Butée
10 Rallonge de support (accessoire en option)
11 Echelle d’angle d’onglet
12 Poignée de blocage
13 Support du plateau
14 Plaque tournante
15 Trous de fixation
16 Socle
17 Serre-joint
18 Collecteur de poussière
19 Poignée de transport
20 Laser
21 Presseur du table
mss 8 mss 10
Volume de livraison
Scie à onglets radiales
Petit matériel
Instructions d’utilisation
Dates techniques
ø lame 210 mm 254 mm
ø alésage 30,0 mm
Dimensions 780 x 460 x 485
mm
810 x 460 x 395
mm
Poids 13,5 kg 17,0 k g
ø Plaque tournante 250 mm
Butées d’onglet à
gauche et à droite 0°, 15°, 22,5°, 30°, 45°
Angle de rotation 45°/0°/4
Angle d’inclinaison 45°
Limites
d’explotaition
Coupe transversale
à 9 58 x 340 mm 78 x 340 mm
Coupe d’onglet à 45° 58 x 240 mm 78 x 240 mm
Coupe en biseau
à 4 32 x 340 mm 42 x 340 mm
Coupe combinée
à 4 32 x 240 mm 42 x 240 mm
Moteur
Moteur V/Hz 230V / 50 Hz
Consumption power
P1
1500 W (S3
20%)
2000 W (S3
20%)
Vitesse à vide 5000 1/min
Classe Laser 2
Sous réserve de modifications!
Pendant la coupe, les niveaux de bruit de la scie à onglet
sont les suivants:
niveau maximal de pression sonore: 99 dB(A)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach MSS 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MSS 10 in the language / languages: English, German, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info