Manual Scheppach MS173-51 SE (page 24 of 68) (English, German, French)

781999

Zoom out

Zoom in

1/68

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

2. Layout

Fig. 1 (1 - 20)

1. Handle

2. Drive lever

3. Engine brake lever

4. Upper push bar, 4a lower push bar

5. Quick-release lever

6. Petrol tank

7. Air lter

8. Side discharge

9. Wheel

10. Spark plug

11. Exhaust

12. Dip stick

13. Drive wheel

14. Wheel height adjustment

15. Discharge ap

16. Grass box

17. Pull starter

18. Cable clips

19. Mulch insert

20. Primer button

3. Scope of delivery

Fig. 1 (a - e)

a) 2 x round head screw M8

b) 2 x washer big

c) 4 x washer small

d) 4 x plastic star grip nut

e) 1 x manual

f) 1 x spark plug

4. Proper use

The machine meets the currently valid EU machine

directive.

Before starting any work, all protective and safety de-

vices must be in place.

• The machine has been designed to be operated by

one person.

• The operator is responsible for third parties in the

area of operations.

• All safety and hazard notices on the machine must

be observed.

• All safety and hazard notices on the machine must

be kept in a completely legible condition.

• Use the machine in a technically awless condition

only, as well as for its intended purpose, in a safe

manner and being aware of dangers, in compliance

with the operating instructions!

• Disruptions which can affect safety in particular

must be eliminated straight away!

• The manufacturer’s safety, operation and main-

tenance instructions as well as the technical data

given in the calibrations and dimensions must be

adhered to.

• Relevant accident prevention regulations and oth-

er generally recognized safety and technical rules

must also be adhered to.

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

WE RECOMMEND:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture.

Read the instruction manual each time before op-

erating the machine and carefully follow its informa-

tion. The machine can only be operated by persons

who were instructed concerning the operation of the

machine and who are informed about the associat-

ed dangers. The minimum age requirement must be

complied with.

In addition to the safety notices contained in this

operating manual and the particular instructions for

your country, the generally recognised technical reg-

ulations for the operation of identical devices must

be complied with.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach MS173-51 SE in the language / languages: English, German, French as an attachment in your email.

The manual is 6.84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach MS173-51 SE Manual

Product: