782066
11
Zoom out
Zoom in
Previous page
1/76
Next page
DGB
09
4. ALLGEMEINE SICHERHEITSHINWEISE
Studieren Sie immer diese Sicherheitshinweisen, wenn das
Warnsymbol auftritt.
a. Sicherheitshinweise
b. Umweltbedingungen
c. Schutzvorrichtung
d. Überprüfen der Maschine
- bei Empfang der Bestellung
- vor jedem Transport der Maschine
- Besondere Sorgfalt sind auf die Bedien-und Zufuhrorgane
zu verwenden
- Lesen Sie sorgfältig diese Bedienungsanleitung. Wenn
Sie etwas nicht verstehen, wenden Sie sich an den
Kundendienst.
- Die Maschine muss von einer erwachsenen und im
Gebrauch geschulten Person bedient werden (Lesen dieser
Bedienungsanleitung). An der Maschine darf nur eine einzige
Person arbeiten.
- Beachten Sie eine Sicherheitszone um den Arbeitsbereich,
um die Rückschlaggefahr zu vermeiden (3).
- Eine regelmäßige Wartung der Maschine sichert ihr gutes
Funktionieren und die Sicherheit, und sie garantiert eine lange
Lebensdauer des Produktes.
- Vor dem Ausführen von Wartungs- und Reparaturarbeiten
die Maschine ausschalten und unbedingt den Netzstecker
ziehen. Warten Sie, bis die Maschine komplett stillsteht und
vom Netz getrennt ist, bevor Sie mit Wartungsarbeiten
- Die Umgebungstemperatur muss zwischen +5°C und
+40°C liegen. Bei 40°C darf die Luftfeuchte 50 % nicht
übersteigen.
Setzen Sie die Maschine nicht dem Regen aus.
- Leuchten Sie den Arbeitsbereich immer gut aus und
arbeiten Sie an einem trockenen Ort, der gut durchlüftet und
sachgerecht eingerichtet ist.
- Entfernen Sie vom Arbeitsplatz und dem Maschinentisch
alle nicht notwendigen Gegenstände oder Werkzeuge, um
die Brandgefahr zu vermeiden.
- Tragen Sie während der Arbeit an der Maschine
Sicherheitsschuhe und Sicherheitsbrille, Gehörschutz und
eine Staubmaske.
- Tragen Sie eng anliegende Kleidung. Legen Sie Halsketten
oder sonstige Schmuckstücke ab, die in das rotierende
Werkzeug geraten könnten.
- Schützen Sie lange Haare mit einem Netz. (Siehe
«Vorsichtsmaßnahmen».)
4. GENERAL SAFETY INSTRUCTIONS
Always study these safety instructions in the presence of the
warning symbol.
a. Safety instructions
b. Environmental conditions
c. Guards
d. Checking the machine
- At reception of the order,
- Before every transport
- Be especially attentive to operatin and feeding elements.
- Carefully read this operating manual. If you do not understand
something, ask your Service Station.
- The machine must be operated by an adult person that has
studied the operating instructions and that has been trained
in the use of the machine. Only one person may work at the
machine at a time.
- Observe a safety zone around the work in order to avoid
injury by kickback (3).
- Regular servicing of the machine ensures good functioning
and safety, and it guarantees a long service life of the
product.
- Before doing any maintenance and repair work, switch off
the machine and pull the electric plug. Wait until the machine
has come to a complete stanstill and is detached from the
power supply, before you start any servicing work.
- The ambient temperature must be between +5°C and +
40°C. At 40°C, the relative air humidity must not exceed
50%.
- Do not expose the machine to rain.
- Keep the work place well lit, and work in a dry environment
that is well aerated and appropriately equipped.
- Remove all the objects and tools not used from the work
place in order to avoid the rist of fire
- During work on the machine wear safety shoes, goggles,
ear protection and a dust mask.
- Wear only close-fitting clothes. Remove any bracelets and
other jewelry which could get caught by the rotating tool.
- Protect long hair by a hair net. (See «Precautions»)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Molda 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Molda 2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 2.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info